53AAD-B16-A10L

Number of Turns:	1
Mounting Type:	Panel Mount
Bushing Thread:	3/8-32
Actuator Diameter:	0.250" (6.35mm)
Actuator Length:	0.630" (16.00mm)
Actuator Type:	Slotted
Termination Style:	Solder Lug
Resistive Material:	Cermet
Adjustment Type:	User Defined
Rotation:	290°
Series:	53
Temperature Coefficient:	±150ppm/°C
Power (Watts):	1W
Built in Switch:	None
Number of Gangs:	1
Tolerance:	±10%
Resistance (Ohms):	1k
Taper:	Linear
Part Status:	Active

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Rotary Potentiometers and Rheostats

Potentiometers, rheostats and rotary switches are all types of electronic components used to control the electrical power supplied to a circuit. The 53AAD-B16-A10L is a rotary potentiometer used to measure and adjust the electrical resistance in a circuit. It is used in applications that require an adjustable voltage control.A rotary potentiometer has a mechanical arm that is connected to a wiper, which moves along a resistive track as the knob is rotated. The resistance value of the potentiometer can be changed by rotating the knob which controls how much voltage is being passed through the circuit. This is commonly used in volume control, tone control, and light dimmer controls.A rheostat is similar to a potentiometer except for a few key differences. A rheostat has two terminals and uses the same rotating knob that is found on a potentiometer, but the knob only controls the variable resistance, not the voltage. The resistance of the rheostat can be adjusted from zero to the value of the resistive track. It is mostly used to regulate the amount of current flowing through the circuit.The 53AAD-B16-A10L rotary potentiometer has a ceramic based track with a total resistance of 1,000 ohms. It has a rated power of 0.75 watts and a maximum operating temperature of 210°F. The resistance potentiometer is available in three versions, each with a different button stroke which can extend from 11 millimetres to 18 millimetres.The 53AAD-B16-A10L rotary potentiometer is commonly used in audio applications such as volume and tone controls on keyboards, mixers, and amplifiers, and as an input control device in many electronic circuits. It can also be used in automotive applications such as in continuous fuel injector systems for fuel ratio control and in air conditioning systems for temperature control.The 53AAD-B16-A10L is made up of four main components; a stationary wiper contact, a resistive track, a lens, which houses the contacts, and a robust plastic housing. The stationary wiper contact is a curved rectangular metal plate that is connected to the rotating part of the potentiometer. The resistive track is a thin ceramic layer with a conductive coating, which is connected to the two external terminals of the potentiometer.When the wiper is rotated by the user, it slides along the resistive track, increasing or decreasing the current going through the circuit. This is done by changing the amount of resistance in the circuit, allowing the user to control the voltage supplied to the circuit.The 53AAD-B16-A10L has been relied on by engineers and designers for several decades due to its low cost and reliable performance. Furthermore, its easy-to-use design makes it ideal for a wide range of applications, from consumer electronics to heavy industrial controls. As such, it is an essential component in many circuits and will continue to be an important device for electrical and electronic applications.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description