5414194-1 Connectors, Interconnects

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Coaxial Connectors (RF) have been widely used for decades for a variety of applications. They offer a reliable means of transferring electrical signals between two or more points. The 5414194-1 connector is a type of RF connector which provides radio frequency connections for both power and data. It is particularly suitable for use in high-powered, low-noise applications.

The 5414194-1 connector features a standard body, with two pin thimbles made of brass and a bayonet locking system. The contacts are made of copper and are plated with gold for improved conductivity and corrosion resistance. The gold plating also acts as a barrier to RF interference, thus improving the signal quality. The connector has a frequency range of up to 150MHz and is suitable for use in both low frequency and high frequency applications.

The 5414194-1 is suitable for a wide range of applications, such as in radar systems, in professional and consumer audio systems, in radio transmitters, in cellular base stations and air navigation systems. The connector can also be used in antenna systems, such as those that are used for microwave and satellite communications. It is also suitable for use in telecommunications networks, where it can be used to connect devices to a main transmission line.

The working principle of the 5414194-1 connector is similar to that of any coaxial connector. It consists of an inner conductor, a dielectric, a shielding layer and an outer conductor. The inner conductor is a center wire that is insulated from the outer conductor by the dielectric material. The shielding layer is made of braided or foil shielding and acts to reduce RF interference. The outer conductor is a shield or jacket that provides protection from physical damage.

The center conductor is attached to the contacts in the connector and then is connected to the device or cable that is to be connected. The outer conductor is soldered to the contacts and then the whole connector is connected to the cable or device. The signals are then transmitted through the inner conductor and to the device or cable, while the shielding layer provides protection from RF interference.

The 5414194-1 connector offers a reliable and high-quality connection for applications such as professional audio, radar systems, radio transmission, wireless communications and antenna systems. It is suitable for use in both low-frequency and high-frequency applications, and is robust enough to withstand extreme environmental conditions. The connector is also relatively inexpensive, making it a popular choice for many uses.

The specific data is subject to PDF, and the above content is for reference