5452631

Mounting Type:	Through Hole
Screw Thread:	M2
Torque - Screw:	0.22-0.25 Nm (1.9-2.2 Lb-In)
Screw Material - Plating:	--
Clamp Material - Plating:	--
Contact Material - Plating:	--
Housing Material:	--
Operating Temperature:	--
Color:	Black
Features:	--
Wire Termination:	Screw
Series:	COMBICON BC
Wire Gauge:	16-30 AWG
Voltage:	300V
Current:	10A
Mating Orientation:	Horizontal with Board
Pitch:	0.150" (3.81mm)
Positions Per Level:	16
Number of Levels:	1
Part Status:	Active
Packaging:	Bulk

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Overview

Terminal blocks are an essential element of today’s electronic circuits. As the name suggests, these blocks are used to connect multiple circuits and wires together. They are used when a device requires more than one electrical connection, or for connecting several smaller components to a larger one. Different types of terminal blocks are available, one of which is the wire to board terminal block.

What is a Wire-to-Board Terminal Block?

A wire-to-board terminal block is a very common type of connector used in many electronic devices. It is used to make interconnections between a circuit board and various wires. The wires are plugged into the holes in the block and then secured with a series of screws or other locking mechanisms.This type of connector is commonly used in applications where the wires need to be securely held in place on a circuit board. The main advantages of using a wire-to-board terminal block are that it provides a reliable connection and makes it easy to troubleshoot any connection problems. They can also be easily replaced if they become damaged.

Application Field and Working Principle

Wire-to-board terminal blocks are used in a wide range of applications including consumer electronics, industrial devices, automotive electronics, and medical devices. Their primary purpose is to provide a secure connection between a circuit board and wires.In a typical setup, a wire-to-board terminal block consists of two parts known as the “terminal” and the “connector”. The terminal is the part which is connected to a circuit board, while the connector is the part which is connected to the wires.When a wire-to-board terminal block is used, the wires must first be inserted into the connector and then the screws tightened to secure the connection. Once the wires are securely in place, the terminal must be connected to the circuit board.The connection is typically made using either solder or crimp connections. In the case of solder connections, the terminal must be heated up and then solder placed on it. As the solder cools, it creates a strong bond between the terminal and the wire. In the case of crimp connections, the terminal is crimped onto the wire, creating an even stronger bond.

Advantages

The main advantage of using wire-to-board terminal blocks is that they provide reliable connections and are easy to troubleshoot. Another key advantage is that they are robust enough to withstand vibration and shocks. The fact that they are relatively inexpensive also adds to their appeal.The main disadvantages of using wire-to-board terminal blocks are that the connections can be slightly more difficult to make and that the connections can become loose over time. This can be mitigated by using locking screws, however this adds to the cost.

Conclusion

Wire-to-board terminal blocks are highly versatile and reliable components which are used in a wide range of applications. They provide a strong and reliable connection and are relatively easy to troubleshoot if there is an issue. The fact that they are relatively inexpensive also adds to their appeal. The main disadvantage of using wire-to-board terminal blocks is that the connections can become loose over time, although this can be mitigated by using locking screws.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description