5452373

Voltage - UL:	300V
Insulation Height:	0.339" (8.61mm)
Contact Tail Length:	0.138" (3.50mm)
Housing Material:	--
Contact Material:	--
Wire Strip Length:	--
Torque - Screw:	--
Screw Size:	--
Ingress Protection:	--
Material Flammability Rating:	--
Features:	Mating Flange
Contact Mating Finish:	Tin
Operating Temperature:	--
Color:	Black
Wire Gauge or Range - mm²:	--
Wire Gauge or Range - AWG:	--
Series:	BCH
Current - UL:	15A
Voltage - IEC:	400V
Current - IEC:	12A
Mounting Type:	Through Hole
Termination Style:	Solder
Plug Wire Entry:	--
Header Orientation:	90°, Right Angle
Pitch:	0.200" (5.08mm)
Number of Levels:	1
Positions Per Level:	5
Number of Positions:	5
Type:	Header, Male Pins, Shrouded (4 Side)
Part Status:	Active
Packaging:	Bulk

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Terminal Blocks - Headers, Plugs and SocketsTerminal blocks, headers, plugs and sockets are connectors designed to interface or coordinate two or more electrical systems, typically high-voltage and low-voltage application. The purpose of these connectors is to transfer power or information from one system to the other or vice versa. Depending on the application, connectors may also be used to extend current carrying capacity, reduce electrical noise, reduce radio frequency interference, provide design flexibility, or to save on labor costs.Terminal blocks were originally designed to eliminate the need for direct cable wiring, which was time consuming and could generate accidental short circuits. In a typical application, one terminal block is bolted to a wall or other permanent surface, and the wires coming in from the different systems are wired to each of the terminal block’s terminals. Connecting the terminals provides a secure electrical connection and a barrier against short circuits and other accidental connections due to mismatched voltage.Headers and connectors are connector types specifically designed to mate with a single type of terminal block. Most commonly these are used to provide a common interface for power or signal cables. Common pairings include headers and a terminal block, headers and a receptacle, and a receptacle and a terminal block. The plug and socket are two other commonly used connector types designed to mate with another of the same or different type.In switching applications, plugs and sockets can provide a method for quickly changing wires from one set of terminals to another. Plug and socket systems are also commonly used in communication systems to connect devices or systems to different locations. By using a plug and socket system, it is possible to quickly and easily connect two devices together without having to remove any cables, resulting in increased efficiency.Terminal blocks, headers, plugs and sockets are commonly used in a variety of application fields including industrial, commercial, automotive, telecommunications, consumer electronics, and medical. Terminal blocks are commonly used in power supplies, electro-mechanical devices, and low-level signal processing. Headers and connectors are used in power supplies to link multiple power sources, and in signal processing and transmission systems to provide both signal and power connections. Plugs and sockets can be found in many consumer electronic products and are commonly used in data communication and haptic feedback systems.The working principle of terminal blocks, headers, plugs and sockets is, as described above, to provide an electrical connection between two systems. This is achieved by connecting the terminals of one block or connector type to the corresponding terminals of another. For instance, a terminal block can be bolted to a panel, and each of its terminals can be wired to a specific component. Connecting an appropriate header or connector type to the terminal block will then provide a safe and reliable electrical connection between the panel and the component. Similarly, a plug and socket system provides the user with the ability to quickly switch wires from one connector port to another without having to manual rewire each connection.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description