54FCT16245ATEB

The 54FCT16245ATEB is a 5V monolithic CMOS octal non-inverting buffer designed for communication and transmission line interfacing. The device has eight output drivers and one input line with eight active-low output enable control. This product can provide exceptional high-speed performance while maintaining low-power operation.

Features

• 1.8 to 5.5V operating voltage
• 8-bit Address/Data bus
• Low-power operation
• Internal circuit protection
• Supports 3.3V protection

Applications

The 54FCT16245ATEB is suitable for a range of communication applications such as data acquisition systems, control systems, and low-speed networks. It is also suitable for transmission line driver applications where it can be used as a repeater or to increase the transmission distance. Additionally, the device can be used as a bus driver, byte-level buffer switch, or low-data-rate translator.

Working Principle

The 54FCT16245ATEB is an octal buffer with active-low output enables. The device has eight channels or lines through which the data is transferred. Each channel has an input, a data line, and an output enable. The output of each channel is controlled by the output enable input. When the output enable input is low, the corresponding channel will transfer the data from its data line to its output. When the output enable is high, the channel will be in the disabled state and will not transfer any data. The device is powered by a single 2.7 to 5.5V power supply.

The 54FCT16245ATEB can be used to protect data transmission lines from noise and improved signal integrity. The device can also be used as an addressable buffer to multiplex data and reduce power consumption. Additionally, the device can be used as a translator to allow transmission of data between two different voltage levels. The device can be used as a line driver buffer or as a translator between two different data formats.