Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

54FCT244ATDB Logic - Buffers, Drivers, Receivers, Transceivers

The 54FCT244ATDB is an octal, low-skew buffer designed to drive high-capacitance loads and reduce noise on the output channels. It is an advanced three-state device with a 128-bit input and output shift register. This device is used in a variety of applications such as data processing, networking, automotive, industrial control, and consumer electronics.

Application Field

The 54FCT244ATDB is an octal buffer capable of rising up to 128-bits of data. It is a low-skew 3-state buffer that can drive large capacitive loads and reduce noise output. This device can be used in data processing systems, networking systems, consumer electronics, automotive, industrial control, and communication systems. Additionally, the device can be used to provide additional drive and capacitive isolation for serial buses. It is ideal for driving data buses between two components.

Working Principle

The 54FCT244ATDB works by inputting data into the device through its 128-bit input, which then passes it to the output register and on to the outputs. The output register holds the data until it is shifted out by the rise and fall of the Enable line. The low-skew data path allows for low-skew, high-speed data transmission. In addition, the output shift registers can be used to provide additional capacitive isolation for serial buses.

The device has three-state outputs that can be toggled between the active and high-impedance state. The three-state outputs are enabled or disabled using the Enable line. When the Enable line is active, the outputs will be in the active state. When the Enable line is set to the high-impedance state, the outputs will be in the high-impedance state. The Enable line can also be used for multiplexing providing a controlled and increased data rate on bus structures.

Conclusion

The 54FCT244ATDB is a high-performance logic buffer designed to increase the speed and efficiency of data processing, networking, automotive and industrial control systems. It is an octal low-skew 3-state device capable of driving high-capacitance load and reducing noise on the output channels. With its three-state outputs, it can be used to multiplex and control the rate of data on bus structures. Finally, the low skews data path allows for high speed data transmission. In conclusion, the 54FCT244ATDB is an ideal solution for data transmission and processing applications.

The specific data is subject to PDF, and the above content is for reference