55100-3M-03-E

Series:	55100
Part Status:	Active
Output Type:	Voltage
Type:	Hall Effect Switch
Actuator Material:	Magnet, South Pole
Termination Style:	Wire Leads with Connector
Frequency:	10kHz
Voltage - Supply:	3.75 V ~ 24 V
Must Operate:	--
Must Release:	--
Operating Temperature:	-40°C ~ 100°C (TA)
Package / Case:	Module

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Magnetic Sensors - Position, Proximity, Speed (Modules)

Magnetic sensors are electronic components that detect motion in the earth\'s magnetic field. They are used in a variety of equipment in the automotive, industrial control and safety industries, including sensing proximity, position, speed, and vibration.The 55100-3M-03-E is an example of a magnetic sensor module used in many applications. It has a sensing range of up to 10 inches, a magnetic moment of 30 mT, and a resolution of 1.7 mT. The module can be used to sense signals emitted from a variety of ferromagnetic objects, and can be used in combination with other sensors such as thermistors and photocells to detect temperature changes or light levels.The module works by detecting changes in a magnetic field. The module uses three different sensing elements to detect a magnetic field: the magnetoresistor, the Hall element, and the ferromagnetic core.The magnetoresistor is the most commonly used sensing element in magnetic field sensing, as it is relatively easy to manufacture and relatively inexpensive. It is often used in magnetic angle detection and position detection applications. When a magnetic field is sensed, the resistance of the magnetoresistor varies in proportion to the strength of the magnetic field. The magnetic field can be determined by measuring the resistance of the magnetoresistor.The Hall element is another type of sensing element used in magnetic field detection. It detects a change in the vertical component of the magnetic field at right angles to the surface. The element is made up of a thin layer of semiconductor material that is placed between two active electrodes. When a magnetic field is adjusted to the Hall element, the voltage across the electrodes can be measured. This voltage measurement is proportional to the magnetic field strength.The ferromagnetic core is typically made of iron and is used in sensing the magnitude of the magnetic field. The core material is magnetically sensitive and can detect changes in the magnetic field strength. It is used in applications such as proximity sensing. The core can detect a change in the magnetic field strength even when the field is not uniform.The 55100-3M-03-E detects changes in the magnetic fields by utilizing the sensing elements and then sends the signals to a microcontroller. The microcontroller then interprets the signals and can be programmed to send out an output from the module. It can be used in a variety of applications such as safety and security systems, industrial automation, robotics, and automotive.The 55100-3M-03-E magnetic sensor module has numerous advantages over other types of magnetic sensors. It is compact, reliable, and has a long operating life. The module has a low detectable field size, high accuracy, and is easy to install. Additionally, because it uses three sensing elements to detect changes in the magnetic field, it can detect a wide range of fields. This module is a great choice for applications where a reliable and accurate magnetic sensor is required. As the module can detect magnetic fields from a variety of everyday objects, it can be used in a variety of applications such as industrial automation, safety and security systems, robotics, and automotive.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description