56P30-01-1-04S

Actuator Type:	Flatted (3.17mm Dia)
Operating Force:	2.520 ~ 6.481gfm
Panel Cutout Dimensions:	--
Depth Behind Panel:	9.58mm
Features:	--
Termination Style:	PC Pin
Mounting Type:	Panel Mount, Through Hole
Contact Finish:	Silver
Contact Material:	Brass
Angle of Throw:	30°
Actuator Length:	9.53mm
Series:	56
Voltage Rating - DC:	30V
Voltage Rating - AC:	115V
Current Rating:	200mA (AC/DC)
Contact Timing:	Shorting (MBB)
Circuit per Deck:	SP4T
Number of Poles per Deck:	1
Number of Decks:	1
Index Stops:	Fixed
Number of Positions:	4
Part Status:	Active

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Rotary switches are miniature devices used to select or control connections in an electrical circuit. They consist of a cylinder with four contacts around the circumference, a central contact in the axis, and a movable arm or contact carrier, which is manipulated to make or break the contacts. The 56P30-01-1-04S rotary switch is a single-pole, four-position switch which is commonly found in electronic devices. The 56P30-01-1-04S rotary switch is typically used to route power to different circuits, select between different signals, and switch between different devices. It can also be used in electronic circuits to control the desired functions of electrical and electronic equipment by switching various combinations of electrical contacts. Additionally, as a safety feature, it can be used to disconnect a circuit and power source if there is an excessive current or voltage across the contacts.The 56P30-01-1-04S rotary switch is designed in a modular fashion. Each of the four contacts and the central contact are connected to separate modules on the rotary switch. A shaft is attached to the rotary switch at one end, and the other end is connected to the movable arm or contact carrier. The contact carrier is then attached to a knob and is arranged so that when it is turned, the contacts can make or break the connections. This arrangement allows for up to four different connection combinations to be made in the circuit.The working principle of the rotary switch is simple: when a knob is turned, the contact carrier is rotated around the shaft and into contact with one of the contacts on the circumference. Depending on the position of the switch, the contact carrier can make a connection between one of the four contacts and the central contact, or break the connection. This allows for different connections in the circuit to be made or broken.Rotary switches are not only limited to the 56P30-01-1-04S model. They come in a variety of sizes and contact arrangements, and can be used to control a wide range of electrical and electronic components. They are an important part of electrical and electronic systems, as they allow for the selection of different connections and provide safety features.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description