56S209-306N5

Frequency - Max:	10GHz
Insertion Loss:	0.05dB
Mating Cycles:	500
Voltage Rating:	500V
Center Contact Material:	Brass
Operating Temperature:	-65°C ~ 165°C
Dielectric Material:	Polytetrafluoroethylene (PTFE)
Center Contact Plating:	Gold
Body Finish:	White Bronze
Body Material:	Brass
Includes:	3 pcs - 1 Connector, 1 End Cap, 1 Ferrule
Ingress Protection:	--
Housing Color:	Silver
Features:	--
Number of Ports:	1
Series:	--
Fastening Type:	Threaded
Cable Group:	RG-58C, 141
Mounting Feature:	--
Mounting Type:	Free Hanging (In-Line), Right Angle
Impedance:	50 Ohm
Shield Termination:	Crimp
Contact Termination:	Solder
Connector Type:	Plug, Male Pin
Connector Style:	TNC
Moisture Sensitivity Level (MSL):	--
Part Status:	Active
Lead Free Status / RoHS Status:	--
Packaging:	Bulk

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Introduction to the 56S209-306N5 Coaxial Connector (RF)

The 56S209-306N5 Coaxial Connector (RF) is a type of coaxial connector with a variety of uses in communications and electronics applications. Specifically, this connector is primarily used in radio frequency (RF) applications, allowing for the transmission of electromagnetic signals in telecommunications networks, satellite systems, and broadcast radio and television equipment. This article will discuss the application field and working principle of the 56S209-306N5 coaxial connector in greater detail.

Applications for the 56S209-306N5 Connector (RF)

The 56S209-306N5 connector is a widely used type of coaxial connector, due to its versatility and performance in radio frequency applications. It is a type of threaded connector that has a weatherproof seal that can be used in both indoor and outdoor applications. As a result, this connector is commonly found in telecommunications networks, satellite systems, broadcast radio and television equipment, and wireless systems. The 56S209-306N5 connector is particularly well-suited for use in automotive applications due to its waterproof seal, which has been tested to meet the water-resistance requirements for many automotive systems. This connector is also ideal for use in military applications, due to its strength and performance under extreme conditions.

Working Principle of the 56S209-306N5 Connector (RF)

The 56S209-306N5 connector is composed of two parts: the inner pin and outer shell. The outer shell is usually made of brass or copper, while the inner pin is typically composed of beryllium copper (BeCu). The two parts are connected with a threaded coupling mechanism, and the connection is sealed with a rubber or neoprene o-ring. This prevents moisture and other contaminants from entering the connection and damaging the connector.In order to ensure a quality connection, the inner pin and outer shell must be properly aligned when connected. This is achieved by the use of a conducting sleeve that lines the outer shell of the connector, providing conductivity and preventing electrical signal reflections on the outer surface of the connector. The 56S209-306N5 connector is a high-quality, reliable connector that is used in a variety of radio frequency (RF) applications. Its unique features and performance make it an ideal choice for many telecommunications and electronics applications.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description