56SP30S-01C05N

Actuator Type:	Flatted (3.17mm Dia)
Operating Force:	2.520 ~ 6.481gfm
Panel Cutout Dimensions:	--
Depth Behind Panel:	9.58mm
Features:	Shaft and Panel Sealed
Termination Style:	PC Pin
Mounting Type:	Panel Mount, Through Hole
Contact Finish:	Silver
Contact Material:	Brass
Angle of Throw:	30°
Actuator Length:	9.53mm
Series:	56
Voltage Rating - DC:	30V
Voltage Rating - AC:	115V
Current Rating:	200mA (AC/DC)
Contact Timing:	Non-Shorting (BBM)
Circuit per Deck:	DP5T
Number of Poles per Deck:	2
Number of Decks:	1
Index Stops:	Fixed
Number of Positions:	5
Part Status:	Active

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

.

Rotary Switches

Rotary switches are electro-mechanical switches that are used to change a series of circuit conditions or perform switching operations on multiple circuits. They use a rotating actuator that can be turned to the desired position, at which point the switch will change circuit states or activate an action. The 56SP30S-01C05N is a rotary switch specifically designed for a variety of uses in industrial and commercial applications.

56SP30S-01C05N Application Field and Working Principle

The 56SP30S-01C05N switches are designed for use in industrial and commercial applications, as well as in industrial automation systems. These switches are commonly used to change circuit conditions, perform memory operations, and control a variety of equipment. They are also used in production lines, conveyors, and other industrial automation systems.The 56SP30S-01C05N switches are constructed with a dielectric body and come in two sizes: five and six US pins. They have an actuator housing with a gear mechanism, a series of contact bridges, and a mounted switch for the contact points. The switch is actuated by a rotary mechanism to move the contact points and activate the circuit, making it suitable for both high and low power applications. The contact bridges are designed to make switchable contact points and alter the circuit state accordingly.The 56SP30S-01C05N switch is powered by a 12-Volt DC motor, which is activated when the switch is turned to the desired position. This motor is connected to the gear mechanism, which is then connected to the actuator, allowing the user to change the circuit state by rotating the actuator. When the switch is turned to the desired position, the contact points connect with each other, allowing the current to flow and activating the circuit.The 56SP30S-01C05N switch is designed for long-term reliability and is designed to resist wear and tear. It is constructed with an anti-corrosion coating and a continuous run time of up to 2000 cycles. The switch also has an integrated latch that can be used to keep the contacts in the desired state, even when the switch is turned off.The 56SP30S-01C05N switch can be used in a variety of applications in industrial and commercial settings. It is commonly used to activate or deactivate circuits and to change the state of multiple circuits simultaneously. This switch is also used in light sensor units and motor control applications, as well as in temperature and process control systems. With its high reliability and its ability to perform a variety of switching operations, the 56SP30S-01C05N switch is a highly dependable solution for many industrial and commercial applications.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description