578R300CTT

Frequency Stability:	--
Current - Supply (Disable) (Max):	--
Height - Seated (Max):	0.083" (2.10mm)
Size / Dimension:	0.276" L x 0.197" W (7.00mm x 5.00mm)
Package / Case:	10-SMD, No Lead
Mounting Type:	Surface Mount
Ratings:	--
Current - Supply (Max):	3.5mA
Operating Temperature:	-20°C ~ 70°C
Series:	578
Voltage - Supply:	3V
Output:	Clipped Sine Wave
Function:	Enable/Disable
Frequency:	30MHz
Type:	TCXO
Base Resonator:	Crystal
Part Status:	Active
Packaging:	Tape & Reel (TR)

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Oscillators: 578R300CTT Application Field and Working Principle

Oscillators are specialty signal sources consisting of circuits that generate periodic waveforms. They are important in electrical engineering and electronics applications due to their ability to produce a consistent, stable waveform. Such waveforms are often used as a time base for various devices. Among the wide range of oscillator types available, one of the most important and widely used oscillators is the 578R300CTT. This article discusses the application fields and working principles of the 578R300CTT oscillator.

Application of 578R300CTT Oscillator

As an inductor-capacitor (LC) oscillator, the 578R300CTT is used in a range of applications, including digital and radio frequency applications. In digital applications, it is primarily used as a timing reference for computers and other digital circuits. This is due to its wide frequency range and high stability. In the radio frequency domain, the 578R300CTT oscillator is used in radio receivers and transmitters. It is also used in cellular communication systems as an ultra-wide band (UWB) transceiver, with excellent frequency stability and good noise rejection. As an oscillator operating in the very high frequency (VHF) and ultra-high frequency (UHF) range, the 578R300CTT is also used in FM/AM radios and military radios, respectively.

Working Principle of 578R300CTT Oscillator

The 578R300CTT oscillator uses an LC circuit as its primary element. This LC circuit is connected to a conductive element that bridges the inductive and capacitive components of the circuit. This bridge acts as the switching element, enabling a continuous flow of current. As the current flows through the inductor, part of it is stored as magnetic energy, while the other part is stored in the capacitor as an electric charge. This process is repeated continuously, resulting in an alternating current (AC) signal output. The frequency of the AC signal can be adjusted by altering the value of the LC components in the circuit. Generally speaking, decreasing the inductance will increase the frequency, while increasing it will decrease the frequency. Similarly, increasing the capacitance will decrease the frequency, while decreasing it will increase the frequency. The other components of the 578R300CTT also contribute to the stability and accuracy of the frequency. This includes the transistor and the resistor. The transistor acts as a switch in the circuit, turning it on and off in order to maintain the alternating current. The resistor acts as a voltage-divider circuit, helping to maintain the proper voltage levels.

Conclusion

The 578R300CTT oscillator is an important component in a variety of digital and radio frequency applications. Its stability and accuracy in producing an alternating signal are due to its LC circuit and various additional components. It can be used in a wide range of applications, including digital timing references, UWB transceivers, and FM/AM and military radios.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description