588L307X2ITT

Frequency Stability:	±280ppb
Current - Supply (Disable) (Max):	--
Height - Seated (Max):	0.083" (2.10mm)
Size / Dimension:	0.276" L x 0.197" W (7.00mm x 5.00mm)
Package / Case:	4-SMD, No Lead
Mounting Type:	Surface Mount
Ratings:	--
Current - Supply (Max):	3.5mA
Operating Temperature:	-40°C ~ 85°C
Series:	588
Voltage - Supply:	3.3V
Output:	Clipped Sine Wave
Function:	--
Frequency:	30.72MHz
Type:	TCXO
Base Resonator:	Crystal
Part Status:	Active
Packaging:	Tape & Reel (TR)

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Introduction

An oscillator is an electronic circuit that produces an oscillating waveform. It is one of the most common components used in electronic devices. The 588L307X2ITT oscillator (sometimes referred to as the “IC oscillator”) is a versatile and reliable highly integrated analog monolithic integrated circuit (IC) that is used in a variety of applications. This article looks at the 588L307X2ITT application field and working principle.

Application Field

The 588L307X2ITT oscillator is primarily used in automotive and industrial applications. It is also used in data communication and for motor control applications. The wide operating temperature range of this oscillator (from -55°C to +125°C) makes it suitable for use in extreme environments.The oscillator is used to generate timing signals and clock pulses. It is used to generate stable low-frequency signals, such as 4MHz or 5MHz. It can also be used for higher frequency signals, such as up to 20MHz, with a little bit of modification.It can be used in a variety of circuit types, including digital logic circuits, analog circuits, and mixed-signal circuits. It is also used in radio frequency (RF)and microwave applications. It is suitable for applications that require very low power consumption, as well as those that require wide dynamic range.

Working Principle

The oscillator works by using the feedback from one branch of the circuit to stimulate another branch of the circuit. This causes the signal to oscillate between high and low states.The 588L307X2ITT oscillator is composed of two sections: the oscillator section and the filter section. The oscillator section is responsible for setting the frequency of the oscillator signal. It contains the resistor, capacitor, and inductor components to form a critically dampened oscillator (CDO) circuit.The filter section is responsible for setting the gain of the oscillator, and for filtering out noise. It is composed of two filters: the low pass filter (LPF) and the high pass filter (HPF). The LPF passes only signals that are below a certain frequency, while the HPF passes signals that are above a certain frequency.The output of the oscillator is a periodic sinusoidal waveform. This waveform is then fed into the filter section, where it is shaped to the required frequency and gain. The result is a signal that is highly suited for timing and communication applications.

Conclusion

The 588L307X2ITT oscillator is a versatile and reliable highly integrated analog monolithic integrated circuit (IC) that is used in a variety of automotive, industrial, communication, and motor control applications. It is suitable for applications that require very low power consumption, as well as those that require wide dynamic range. It works by using the feedback from one branch of the circuit to stimulate another branch of the circuit to produce an oscillating waveform. The filter section is used to shape the signal into the required frequency and gain.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description