589S144X2IAT

Frequency Stability:	±280ppb
Current - Supply (Disable) (Max):	--
Height - Seated (Max):	0.083" (2.10mm)
Size / Dimension:	0.276" L x 0.197" W (7.00mm x 5.00mm)
Package / Case:	4-SMD, No Lead
Mounting Type:	Surface Mount
Ratings:	--
Current - Supply (Max):	6mA
Operating Temperature:	-40°C ~ 85°C
Series:	589
Voltage - Supply:	5V
Output:	HCMOS
Function:	--
Frequency:	14.4MHz
Type:	VCTCXO
Base Resonator:	Crystal
Part Status:	Active
Packaging:	Tape & Reel (TR)

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Oscillators: 589S144X2IAT Application Field and Working Principle

An oscillator is a device whose output signal is a single frequency that will continue to repeat periodically with little to no falling off in its signal strength and waveform shape. Very often, an oscillator is integrated inside of an electronic or electrical circuit and is used to stabilize the operating frequency and keep the circuit in phase with an input signal. This stability is necessary for many devices to work as intended, and it is due to its stability and precision that the oscillator is so widely used, especially in modern circuits.The 589S144X2IAT oscillator is a type of oscillator used primarily in electronic communications systems. It is a highly reliable, precision oscillator that operates at frequencies ranging from 1.2MHz to 40MHz. The oscillator is built using a crystal unit, commonly Quartz, to change the frequency the circuit runs at. It is designed to provide an Constant or Accurate frequency output with a signal amplitude of 5V and an impedance that can be programmed through internal registers. The oscillator has applications mainly in the telecommunication industry, particularly in cellular radio, global positioning (GPS) and satellite communication systems. In these applications, the oscillator is used to clock signals carrying data from one transmitter or receiver to the other – ensuring that both ends of the transmitter are working on the same frequency, thus increasing accuracy and reliability. The 589S144X2IAT oscillator is also used increasingly in pulse code modulation (PCM) and time division multiplexing systems (TDM). In terms of its working principle, the oscillator has a resonant frequency which is determined by the components used in its circuit, including the quartz crystal. When electrical power is applied, the oscillation will begin vibrating the quartz crystal at its natural, resonant frequency and also pulsing the amplifier gain until a signal proportional to the input power is amplified. This amplified signal is then sent to other components of the circuit, such as a mixer or a divider, where it will go through a feedback loop and be adjusted to its correct operational frequency. The 589S144X2IAT oscillator has several benefits over its peers. One such benefit is its high level of linearity and phase accuracy, which helps achieve optimized performance in communications systems. As mentioned earlier, the oscillator is also highly reliable and can be calibrated as often as necessary. Furthermore, it has a wide operating temperature range that allows it to work flawlessly even in extreme weather conditions. All these factors contribute significantly towards the oscillator’s widespread use in the telecommunication and consumer electronics industry. To conclude, the 589S144X2IAT oscillator is a special type of oscillator, primarily used in telecommunication systems such as cellular radio, GPS and satellite communication systems. It operates at frequencies ranging from 1.2MHz to 40MHz and uses a quartz crystal to change the output frequency. Furthermore, it has a high level of linearity, phase accuracy and reliability, as well as a wide operating temperature range, all of which contribute to its success in the telecommunication industry.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description