5900-100-RC

DC Resistance (DCR):	19 mOhm Max
Height - Seated (Max):	--
Size / Dimension:	0.453" Dia x 0.900" L (11.51mm x 22.86mm)
Supplier Device Package:	Axial
Package / Case:	Axial
Mounting Type:	Through Hole
Inductance Frequency - Test:	1kHz
Operating Temperature:	-55°C ~ 105°C
Ratings:	--
Frequency - Self Resonant:	--
Q @ Freq:	--
Series:	5900
Shielding:	Unshielded
Current - Saturation:	8.7A
Current Rating:	4.7A
Tolerance:	±10%
Inductance:	10µH
Material - Core:	Ferrite
Type:	Wirewound
Part Status:	Active
Packaging:	Bulk

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Fixed inductors are small electronics components used in many electrical and electronic circuits. They are also known as chokes, coils, inductors or inductance coils. Generally, they consist of two terminals to which an electric current is applied. Fixed inductors act as a bridge between the electronic circuits and the power source. The inductor usually has a fixed coil of wire wound around a magnetic core and connected across two terminals which together form the inductor. The key purpose of this type of electrical component is to introduce a certain amount of inductance into the circuit. This helps limit the maximum amount of current flow which can help prevent circuit overloading or signal distortion. In other words, inductors help maintain a certain level of impedance in the circuit so that signals can be accurately transmitted and received.The 5900-100-RC Application Field And Working Principle are specifically applied in cases where the electrical component has to be adjusted to various applications. This fixed inductor works by utilizing a rotor and a stator which together form a single continuous coil. The rotor is attached to the center of the coil and is coupled to a mechanism that can control the number of coils (or turns) in the inductor. Depending on how this is adjusted, the inductance of the component can be varied. The 5900-100-RC can also be adjusted to different configurations. For instance, the inductor can be used as a single-phase inductor or a two-phase inductor. Furthermore, the 5900-100-RC can also be used as a parallel or serial inductor. Finally, the inductance range is quite large (100uH to 1H).The actual working principle of the 5900-100-RC is fairly simple. The rotor is mechanically linked to the center of the coil and uses electromagnets to generate an alternating current (AC). This AC is amplified and sent through the coil. This generates a magnetic field around the inductor which then alters the inductance of the component. By controlling the number of turns in the coil, the range of inductance generated by the 5900-100-RC can be adjusted. This can be useful in many applications where a precise amount of inductance is required. This type of inductor is commonly used for integrating into power factor correction circuits, signal filtering, pulse transformation or even power matching.In conclusion, the 5900-100-RC has a wide range of applications and can be adjusted to meet various requirements. It is a crucial part of many electronic circuits and helps to maintain the desired amount of inductance. This can help prevent unwanted electrical signals and circuits overloads.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description