59065-2-S-03-A

Series:	59065
Part Status:	Active
Output Type:	SPST-NO
Type:	Reed Switch
Actuator Material:	Magnet
Termination Style:	Wire Leads
Voltage - Supply:	--
Must Operate:	9.00mm
Must Release:	--
Operating Temperature:	-20°C ~ 105°C (TA)
Package / Case:	Cylinder, Threaded

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

59065-2-S-03-A Magnetic Sensor Position, Proximity, speed (Module)Magnetic sensors are the key component for a wide range of automotive electronic applications. One type is position sensors, which is mainly used in vehicle braking systems. This article will discuss the application field and working principle of the 59065-2-S-03-A, an automotive position magnetic sensor module.Application FieldThe 59065-2-S-03-A magnetic sensor module is mainly applied in the automotive braking system, such as ABS, ESC, and traction control. It can be used to accurately measure the parameters of tire rotation speed, such as wheel speed, wheel deceleration, and wheel acceleration. It also has the characteristics of fast response time and high accuracy.Uses:The 59065-2-S-03-A is well-suited for use in application fields such as the automotive braking system, ABS, ESC, and traction control systems, as it not only has a fast response time but also provides high accuracy. For example, it can measure the parameters of wheel speed, wheel deceleration, and wheel acceleration in order to provide accurate results for the overall braking system. In addition to brake system, it also can be used in the vehicles’s gearbox and transmission system, allowing drivers to accurately monitor the vehicle\'s speed and acceleration.Working PrincipleThe 59065-2-S-03-A is a magnetic sensor using Hall Effect technology. It can detect direction and speed of the wheel rotation by using one or two wires. The working principle of the 59065-2-S-03-A is quite simple: when a wheel rotates, the internal rotor will rotate with it. As the rotor is in contact with the magnetic sensors, a change in the magnetic field strength is detected. This change is then passed through a circuit and converts it into a corresponding signal, which is then used to measure the speed and direction of wheel rotation. Advantages:The advantages of this Hall effect-based magnetic sensor module is its small size, robust design, and low power consumption. In addition, it does not require a separate power supply, as it is powered by the rotational energy of the wheel. As a result, the 59065-2-S-03-A is an ideal choice for automotive applications where space is limited.ConclusionThe 59065-2-S-03-A is an automotive position magnetic sensor module designed for use in the automotive braking system, gearbox, and transmission system. It is based on Hall Effect technology and can detect the rotation speed of a wheel by measuring the change in the magnetic field strength. This sensor module is compact, robust, and low power consumption. It is also ideal for automotive applications where space is limited.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description