590BC16M9344DGR

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

An oscillator, as its name suggests, is a circuit or system designed to generate a continuous signal at a given frequency. The frequency itself is often determined by the time base of the circuit, but it may also be determined externally. Oscillators operate on the principle of feedback, where inputs are amplified and recirculated back to the input as outputs. When these feedback signals exceed a certain threshold, they cause a positive cycle of changes. This cycling process is what eventually produces a stable and periodic output signal.

The 590BC16M9344DGR oscillator is a low-power, low-noise low-speed crystal oscillator with a max operating frequency of 16MHz. It has a very low operating current with an operational consumption of just 40 microamps. This makes it ideal for use in low-power, low-voltage, applications. This oscillator has a silicon P-Well structure, making it less affected by environmental noise and providing it with greater stability and temperature coefficient levels. The output buffer is made from a balanced FET bridge, providing a high output voltage swing and a low-impedance output.

The 590BC16M9344DGR is primarily used in consumer electronics, such as cell phones, televisions, and DVD players. Its low-power consumption makes it suitable for battery powered devices. It can also be used for frequency synthesis applications, such as radio receivers, radio transmitters, and medical imaging systems. Additionally, since it has a low-noise level, it can be used in precision oscillator applications, such as frequency synthesizers, wide-bandwidth low-distortion oscillators, and for measuring MCU clock drift.

The 590BC16M9344DGR oscillator works on the principle of negative resistance. It is a redundant cell-based solution that consists of a single Oscillator, an output inverter, and two cross-connected resistor networks. As current flows through the resistor networks, it creates a negative feedback loop that causes the oscillator to increase the output frequency. The resistor networks then cause the feedback to decrease the output frequency until it reaches a steady state. This negative feedback loop ensures that the frequency of the oscillator is maintained over a wide range of temperatures and input voltages.

The key feature of the 590BC16M9344DGR is its low-power consumption and wide frequency range, making it ideal for use in low-power, low-speed applications. Additionally, its low-noise levels and temperature coefficient levels make it suitable for precision oscillator applications. With its wide frequency range, it is suitable for use in frequency-synthesis applications, radio receivers, and medical imaging systems.

The specific data is subject to PDF, and the above content is for reference