591AB106M250DG

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

An oscillator is an electronic circuit, device or system that generates a periodic, oscillating electronic signal, often a sine wave or a square wave. Oscillators are widely used in electronic communications, digital systems and signal processing, to generate the desired signal or modulating signal. One of the most popular oscillators is the 591AB106M250DG, which is used widely in various consumer electronic appliances.

Application Field of 591AB106M250DG

The 591AB106M250DG oscillator is most commonly used in radios and other consumer electronic products. This oscillator consists of four separate parts: a resistive element, a capacitive element, a feedback element and an active element. It operates with two resistors, one capacitor and one amplifying active device, which is usually a field effect transistor (FET). Though this is an old school design, it is still used quite commonly in many electronics products.

It can be used as a low power frequency synthesizer, modulator, demodulator, video timing signal generator, clock synthesizer and audio signal generator. The 591AB106M250DG can also be used to generate signals such as sine waves, pulses and other audio and video signals. It is extensively used in televisions, satellite radios, and other consumer electronics products.

Working Principle of 591AB106M250DG

The 591AB106M250DG is an LC oscillator, which depends on an inductor-capacitor combination to produce an alternating signal. The LC combination with the active element forms a feedback loop, which requires a very small current to sustain oscillations at a specific frequency. When the power supply is turned on, the current flows through the resistance and capacitor, and charges up the capacitor until its voltage levels match the supply voltage. When the voltage is the same, the current stops flowing and the capacitor starts to discharges under the inductive force. The discharged node voltage will be opposite to the supply voltage, and the current continues to flow until the node voltage and the supply voltage are equal again.

The voltage is provided as an input to the active element, which is usually an FET amplifier. The gain of the FET with respect to current is very high, and the voltage across the inductor and capacitor will amplify and the capacitor will recharge again until the voltage across the capacitor is equal to the supply voltage. Thus, the LC circuit oscillates at a specific frequency, and this frequency depends on the values of inductance and capacitance in the circuit.

The specific data is subject to PDF, and the above content is for reference