593D477X0004E2TE3

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Tantalum capacitors are a type of electrolytic capacitor, often referred to as “solid electrolytic capacitors” due the their use of a solid electrolyte (an electrolytic paste). They are popular capacitors due to their high capacitance capabilities and wide temperature range.

The code 593D477X0004E2TE3 is a specific type of tantalum capacitor, consisting of a tantalum foil with an oxide coating. This type of capacitor is ideally suited for applications that require a high capacitance value in a small size. The code denotes both the physical dimensions and the capacitance value of the particular capacitor.

The application field of the 593D477X0004E2TE3 tantalum capacitor is mainly in filtering, bypassing, decoupling and timing applications. In a filtering application, the capacitor is used to block any high frequency interference that enters the system. In a bypassing application, the capacitor is used to block any low frequency interference that comes in from the power supply. In decoupling applications, the capacitor is used to remove any power ripple on the power supply lines. Finally, in a timing application, the capacitor is used to generate pulses or to slow down signals.

The working principle of the 593D477X0004E2TE3 is based on the electrical behavior of the anode and cathode. The anode is typically made of copper and the cathode of tantalum. When a reverse voltage is applied, the electrolyte reacts, causing the copper to oxidize, resulting in the formation of copper oxide. This layer is highly insulating, and any current that passes through the capacitor has to go through the oxide layer.

The 593D477X0004E2TE3 also has a specialized construction that allows it to operate in applications that require a high ripple current. The special construction consists of an anode separated from the cathode by a “separator”. The separator is a dielectric material that has a higher electrolyte permeability than the oxide coating. This allows the capacitor to handle higher ripple currents without compromising its capacitance.

The 593D477X0004E2TE3 tantalum capacitor is an ideal choice for a variety of applications due to its high capacitance capabilities, wide temperature range and specialized construction. It can be used for filtering, bypassing, decoupling and timing applications, and is capable of handling a high ripple current.

The specific data is subject to PDF, and the above content is for reference