595CA65M0000DG

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

595CA65M 0000DG Oscillators

The 595CA65M 0000DG oscillator is a type of oscillator available for industrial and commercial applications. It offers high performance frequency control, a wide frequency range and a high stability. It has also been designed with low noise and low power consumption for a wide variety of applications.

The 595CA65M 0000DG oscillator is comprised of two components, a voltage controlled oscillator (VCO) and a phase-locked loop (PLL). The VCO is responsible for producing a stable and adjustable frequency signal, while the PLL is responsible for the frequency-to-voltage conversion, phase/frequency discrimination and loop filtering.

The VCO is a variable gain amplifier, the gain of which is used to change the frequency of the output signal. It works by comparing the input phase/frequency information with the reference signal, and then adjusts the gain of the amplifier in order to maintain the same phase/frequency relationship. In other words, the VCO is used to \'lock on\' to a particular signal frequency and the voltage controlled output of the VCO is then fed into the loop filter.

The loop filter is an active network comprised of capacitors and resistors. It is used to further reduce the noise of the VCO output, and to provide feedback for the PLL. This feedback is used to further adjust the gain of the VCO in order to lock on to the desired frequency. The output of the loop filter is then used to drive the PLL, which converts the frequency of the VCO output into a voltage signal.

The 595CA65M 0000DG oscillator is suitable for a variety of commercial and industrial applications, such as instrumentation, telecommunication systems, storage systems, audio equipment and medical equipment. It is designed to operate in temperatures ranging from -40°C to 85°C, and has an operating voltage range of 1.8V to 3.3V. It is capable of providing frequencies from 1Hz to 33MHz, and has low phase noise of -88dBc/Hz over a wide frequency range.

The 595CA65M 0000DG oscillator is reliable, stable and highly accurate due to its use of a PLL and a VCO. It is also very flexible, as the frequency can be easily adjusted through the use of the PLL and the VCO. This makes it ideal for applications where frequency must be accurately controlled.

The specific data is subject to PDF, and the above content is for reference