595CH80M0000DG

Frequency Stability:	±20ppm
Current - Supply (Disable) (Max):	75mA
Height - Seated (Max):	0.071" (1.80mm)
Size / Dimension:	0.276" L x 0.197" W (7.00mm x 5.00mm)
Package / Case:	6-SMD, No Lead
Mounting Type:	Surface Mount
Ratings:	--
Current - Supply (Max):	100mA
Operating Temperature:	-40°C ~ 85°C
Absolute Pull Range (APR):	±15ppm
Series:	Si595
Voltage - Supply:	3.3V
Output:	CMOS
Function:	Enable/Disable
Frequency:	80MHz
Type:	VCXO
Base Resonator:	Crystal
Part Status:	Active
Packaging:	Strip

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Oscillators: 595CH80M0000DG Application Field and Working PrincipleAn oscillator is a device or circuit that generates a signal, usually an alternating current (AC), at a specific frequency. Oscillators are widely used in many applications ranging from digital communication to embedded systems and robotics. One of the most common and popular oscillators used in the electronics industry is the infamous 595CH80M0000DG. This oscillator has become the industry standard due to its reliability and wide range of applications.The 595CH80M0000DG oscillator is a low-noise, programmable oscillator that can be tuned to almost any frequency between 16MHz and 80MHz. It is commonly used in video, audio, telecom, and networking equipment, as well as in consumer electronics. It offers stability and performance within a narrow parameter range, allowing it to meet the requirements of a wide variety of applications.The 595CH80M0000DG oscillator is based on a Pierce oscillator architecture, which is a type of electronic oscillator that uses an amplifier and a negative feedback loop to generate an oscillating waveform. It is made up of three major components: an amplifier, a frequency-determining resistor-capacitor (RC) network, and an internal feedback resistor. At the heart of the oscillator is a CMOS inverter, which is a dual differential amplifier. This is connected to the RC network, which is used to tune the oscillator to the desired frequency.When current is applied to the oscillator, the inverter amplifies the input signal and produces an output signal that is fed back to the input side of the amplifier. This forms a negative feedback loop that causes the output waveform to oscillate at a frequency determined by the RC network. As the frequency changes, the DC biasing of the amplifying transistor also shifts, producing a phase shift that alters the frequency of the oscillation.The 595CH80M0000DG oscillator is a very versatile device. It is designed to be used in a wide variety of applications, including radio frequency (RF) communications, radar, medical imaging, robotics, automotive electronics, and computer processors and memory. It is also used in industrial and commercial applications such as motion controllers, frequency counter/readouts, and data acquisition systems.This oscillator is increasingly popular due to its ability to be easily customized to the user’s exact specifications. Adjustable parameters such as frequency, start-up, stability, power supply, temperature range, and logic type can be altered to meet the requirements of the application. This makes the 595CH80M0000DG an ideal choice for any embedded system need.The 595CH80M0000DG oscillator is a reliable and flexible solution for a variety of applications. It offers low-noise performance, adjustable parameters, and a wide frequency range, making it the industry standard for oscillators. It is sure to continue to be a valuable component in the electronics industry for years to come.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description