595PB10M0000DG

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Oscillators

Oscillators are electronic circuits that produce a continuous output signal, usually an alternating or periodic waveform, in response to a transient input signal. They are commonly used as signal processing components in audio and video equipment, and in communication, sensor, and data acquisition equipment. Oscillator circuits come in a wide variety of types, sizes, and configurations, ranging from very simple components to complex multi-stage structures.

The 595PB10M00000G oscillator is a great example of an oscillator used in signal processing. It is a programmable type oscillator with frequency ranges from 595Hz to 10MHz. It is capable of powering systems with higher power requirements, and is ideal for use in communication, audio, and video applications.

Application Field

The 595PB10M00000G oscillator can be used in many applications including radio, audio-frequency, and digital communication systems, including marine, automotive, and avionics systems. It is also suitable for use in a variety of control applications, including robotic systems, security systems, computer-controlled home appliances, and other industrial control systems. Additionally, this oscillator is commonly used in microcontroller and microprocessor-based systems, such as embedded systems, and in medical and scientific instruments.

Working Principle

The 595PB10M00000G oscillator uses two basic components to generate a stable signal: a quartz crystal and an electronic amplifier. The crystal oscillates at the specified frequency when an external dc voltage is applied to it. This signal is then amplified and the gain is adjusted to maintain a stable output. The output waveform of the oscillator is usually a sine wave, but it can also be a sawtooth, triangular, or square wave.

The frequency of the 595PB10M00000G oscillator depends on the resonance of the quartz crystal, its cut, and orientation, as well as the electronic components used. The cut of the crystal determines the cut-off frequency of the oscillator, while the orientation determines the range of its frequency.

The specific data is subject to PDF, and the above content is for reference