Series:	59630
Part Status:	Active
Type:	Liquid
Output Type:	Switch (Single Float)
Output Configuration:	SPST-NO
Current:	500mA
Switch Actuation Level:	0.2" (5.08 mm)
Mounting Type:	Panel Mount, M8 Thread
Material - Housing & Prism:	--
Operating Temperature:	-40°C ~ 105°C
Voltage Rating:	200VDC

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Introduction to 59630-1-T-02-C Float Level Sensors

Float level sensors are commonly used to sense and monitor the level of a liquid or solid within a container or vessel. This type of level sensor works by reading and interpreting the level of the material being measured and transmitting this information to a controlling unit. 59630-1-T-02-C is a type of float level sensor manufactured by TB Woods/Ebco and is designed for use in a variety of industrial applications.

Application Field of the 59630-1-T-02-C Float Level Sensor

The 59630-1-T-02-C float level sensor is suitable for use in a range of industrial applications, including chemical processing, oil and gas, manufacturing and industrial control. It is ideal for use in applications requiring continuous level monitoring, such as cooling towers and tanks, or for monitoring fluid logic systems. It is available in both AC and DC versions, and is particularly suited for applications involving corrosion resistant liquid and gases.

Working Principle of the 59630-1-T-02-C Float Level Sensor

The 59630-1-T-02-C float level sensor uses a magnetic field to sense the level of the material being measured. The float, which is made from non-corrosive plastic, is suspended in the liquid or solid by a cable or rod. When the material level rises or falls, the magnetic field on the float will cause it to float or sink accordingly. The float is connected to a signal generator, which in turn is connected to a receiver or display unit such as a controller or a computer.The signal generator converts the change in the magnetic field into a voltage, which is then converted into a digital signal. This digital signal is then sent to the controller or display unit for interpretation. This allows the user to monitor the level of the material being measured in real time. The 59630-1-T-02-C float level sensor is highly reliable and accurate, and is capable of detecting minute variations in the level of the material being monitored.

Advantages of the 59630-1-T-02-C Float Level Sensor

The 59630-1-T-02-C float level sensor offers a number of advantages over other level sensing technologies. It is a reliable and accurate device, capable of detecting minute variations in the level of the material being monitored. It is also easy to install and requires minimal maintenance. Additionally, it does not require the use of mechanical moving parts, thus eliminating the risk of failure due to wear and tear.Finally, the 59630-1-T-02-C float level sensor is highly cost effective. It is easily available and can be purchased at an affordable price. It is also highly durable and does not require frequent repairs or replacements. This makes it an ideal choice for long-term use in a wide range of industrial applications.

Conclusion

The 59630-1-T-02-C float level sensor is a reliable and accurate device for sensing and monitoring the level of liquid or solid within a container or vessel. It works by sensing a change in the magnetic field caused by the level of the material being measured, and converting this into a digital signal that is sent to a controlling unit. The 59630-1-T-02-C is suitable for use in a wide range of industrial applications, and offers a number of advantages over other level sensing technologies. It is easy to install and maintain, and is highly cost effective.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description