59630-1-T-05-C

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Float Level Sensors

Float level sensors, often designated by the code 59630-1-T-05-C, are used to measure the level of liquids in open tanks, pressure vessels, or other containers. To do this, the sensors use a float attached to a rod that moves up and down according to the liquid level. The sensors can be used for point-level measurements with one float or continuous-level measurements with multiple floats.

The most common type of float level sensors is called the buoyancy type. These sensors use buoyancy to lift the float and rod assembly as the liquid level rises. When the float rod reaches its preset upper limit, the sensor trips and shuts off the flow of the liquid, or sends a signal to alert the system to the high liquid level. When the liquid level falls, the float lowers the rod assembly until it reaches its preset lower limit and the sensor trips and begins the flow of liquid again. The sensors are usually operated by electricity from 110 volt AC or 12 or 24 volt DC power supply.

Another type of float level sensor is the magnetic type. In this type of sensor, the float moves up and down along a rod that is inside a stationary tube. The float is fitted with a magnet, and when it reaches the desired point, it attracts a switch inside the stationary tube, which trips the sensor or sends a signal to the system. The use of a magnetic float allows for greater accuracy in the sensing and control of the liquid level.

Float level sensors are typically used in a closed loop system, which means that the sensors must be matched to the application to ensure accuracy and reliability. For this reason, it is important to select the right type of float level sensors for the job in order to get the best results. Float level sensors are widely used in a range of applications, such as preventing overflows in waste water tanks, controlling levels in pump rooms, regulating the level of liquids in evaporators, and measuring levels in heat exchangers.

In conclusion, float level sensors are an important means of measuring and controlling the level of liquids in open tanks, pressure vessels, or other containers. They are usually operated by electricity, and are available in buoyancy and magnetic types to ensure accuracy and reliability. Float level sensors are widely used in a range of applications, ranging from preventing overflows in waste water tanks to regulating levels in evaporators. With proper selection and installation, float level sensors can provide reliable and accurate measurement of liquid levels.

The specific data is subject to PDF, and the above content is for reference