5P49V5901B618NLGI8

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The 5P49V5901B618NLGI8 is a clock/timing generator, phase-locked loop (PLL), frequency synthesizer, developed with both cost and space savings in mind. It is a multichip solution based on standard ICs available from almost any equipment manufacturer. It typically uses a crystal or ceramic resonator as its oscillator, in which the frequencies for the clock/timing generator, PLL and frequency synthesizer are derived from.

The 5P49V5901B618NLGI8 features the ability to provide several clock/timing generator outputs and generate multiple PLLs with up to eight output dividers. Each of these dividers can be individually turned off or on. This makes it suitable, particularly, for applications requiring multiple PLLs and/or multiple reference clocks. The 5P49V5901B618NLGI8 also accepts external clock inputs, allowing for the synchronization of multiple clocks.

The 5P49V5901B618NLGI8 provides programmable output dividers and pre-divider settings and allows the output frequency to range from 0.13 to 160 MHz. Output frequencies are determined and adjusted through the combination of the clock input and the PLL’s programmable settings. The 5P49V5901B618NLGI8 has a 32-bit wide Serial Peripheral Interface (SPI) for configuring the device.

The 5P49V5901B618NLGI8 has a wide array of applications. It can be used to synchronize multiple systems and generate multiple and different frequencies in a synchronized manner. It can generate any fixed frequency and also generate a random frequency. It also offers controlled frequency division, allowing it to generate clock signals and PLLs over an extended frequency range. In telecommunications applications, it can be used to generate various frequencies for transmission and timing signals, and can also be used in video and audio applications to generate video clock and stereo sub-carrier frequencies.

The working principle of the 5P49V5901B618NLGI8 is based on the same principles as other timing solutions. The 5P49V5901B618NLGI8 uses a low-power oscillator, such as a quartz crystal or ceramic resonator, to generate a reference frequency. This reference frequency is then divided by a frequency divider or pre-divider, depending on the configuration settings, to generate a selection of clock outputs. The output frequency is then multiplied by the programmed PLL settings, to generate the desired output frequency.

The 5P49V5901B618NLGI8 is a versatile and highly efficient solution for clock and timing application requirements, due to its multiple output dividers, programmable pre-divider settings, and wide frequency range. The combination of its low cost, compact size and its ability to provide multiple frequencies and PLLs, make it a highly attractive option for a variety of clock/timing applications.

The specific data is subject to PDF, and the above content is for reference