5V50013DCG

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Clock/Timing is a complicated and critical part of the electronics industry. It is essential for accurate communication and timing in the operation of any digital system. Clock/Timing includes Clock Generators, Phase-Locked Loops (PLLs), and Frequency Synthesizers. The 5V50013DCG is an example of a Clock Generator/PLL/Frequency Synthesizer and is commonly used in digital system applications.The 5V50013DCG is a 3.3V 10-bit Programmable Clock Generator/PLL/Frequency Synthesizer that operates at a maximum frequency of 500MHz. It is designed to provide low jitter, a wide range of frequency outputs, and programmable output clocks. The 5V50013DCG is ideal for use in FPGA, ASIC and other digital system applications such as networking, computer servers, and automobile among others.The 5V50013DCG is designed with a Numeric Control Oscillator (NCO), which is a digital oscillator that generates a sine wave whose frequency is controlled by a digital word. This digital word is programmed using registers and memory, allowing for the generation of multiple outputs with various levels of accuracy. The 5V50013DCG also features an on-chip phase-locked loop (PLL) that is used to maximize the accuracy and stability of digital signals. The PLL is used to synchronize the NCO oscillator with the reference clock, ensuring accuracy and stability of clock/timing signals.Additionally, the 5V50013DCG also features programmable frequency dividers and multiplexers, which allow for the generation of various clock/timing frequencies and output signals with various levels of accuracy. The frequency dividers are used to divide down the primary frequency, while the multiplexers are used to select a particular output clock or timing signal. This allows the 5V50013DCG to generate a wide range of output frequencies, ranging from a few hundred kilohertz up to 500MHz.The 5V50013DCG features several features to improve the accuracy and stability of the clock/timing signals that it produces. It has an on-chip Automatic Gain Control (AGC), which is used to provide the most accurate frequency output possible. Additionally, the 5V50013DCG also has a Digital PLL (DPLL) which maximizes the accuracy and stability of the output signal by tracking variations in frequency and phase.In conclusion, the 5V50013DCG is designed to provide low jitter, wide range of frequency output, and programmable output clocks. It is commonly used in FPGA, ASIC and other digital system applications, such as networking, computer servers and automobiles. The 5V50013DCG is designed with an Numeric Control Oscillator (NCO), an on-chip phase-locked loop (PLL), programmable frequency dividers and multiplexers, and Automatic Gain Control (AGC) and Digital PLL (DPLL) for improved accuracy and stability. Together, these features allow for accurate and stable clock/timing signals.

The specific data is subject to PDF, and the above content is for reference