Allicdata Part #: | CCM1333-ND |
Manufacturer Part#: |
5VR1 |
Price: | $ 14.41 |
Product Category: | Filters |
Manufacturer: | TE Connectivity Corcom Filters |
Short Description: | LINE FILTER 250VAC 5A CHASS MNT |
More Detail: | N/A |
DataSheet: | 5VR1 Datasheet/PDF |
Quantity: | 38 |
1 +: | $ 13.10400 |
10 +: | $ 12.70710 |
25 +: | $ 12.30970 |
50 +: | $ 11.91270 |
100 +: | $ 11.51560 |
250 +: | $ 10.32430 |
500 +: | $ 9.92719 |
Series: | R |
Part Status: | Active |
Filter Type: | Single Phase |
Configuration: | Two Stage |
Voltage - Rated DC: | -- |
Voltage - Rated AC: | 250V |
Current: | 5A |
Frequency - Operating: | 50/60Hz |
Applications: | General Purpose |
Approvals: | CSA, UR, VDE |
Operating Temperature: | -10°C ~ 40°C |
Mounting Type: | Chassis Mount |
Termination Style: | Quick Connect |
Inductance: | 1.032mH |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
Power Line Filter Modules
Power Line Filter Modules are electronic devices used to reduce power line noise. The devices contain metal conductors and/or inductors that act as a low-pass filter to reject unwanted frequencies. They are also used to protect equipment from over-voltage spikes and other power disturbances. They can also be used to reduce radio frequency interference (RFI) and provide protection against lightning strikes and other electrical hazards.
The most common type of power line filter is the five-vertex 1 module (5VR1), which is a rectangular plug-in module designed for mounting in a power distribution panel. The 5VR1 has five terminals: three terminals for power and two for ground. It is designed to reduce line noise levels and also provide some over-current protection for the connected equipment. The 5VR1 contains two inductors and a capacitor which form an RLC low-pass filter.
The 5VR1 works by allowing AC power signals to pass through while blocking high frequency noise on the power line. The inductors and capacitor act as a low-pass filter to reduce the noise levels in the power line. The capacitor helps reduce the effects of transients and surges while the inductors form the inductive reactance (measured in ohms) that provides the filtering. The 5VR1 also has the ability to trip the circuit breaker in the event of a power line over-voltage or over-current condition.
The 5VR1 is used in a variety of applications, such as automotive, consumer, industrial and audio-video applications. In automotive applications, the filter is used to reduce line noise in automotive stereo systems, radios, power systems, and engine management systems. In a consumer application, the filter can be used to protect the audio/video system and other equipment from line noise. In industrial applications, the module can be used to reduce the effects of ground potential rises, neutral-to-ground voltage surges, and other power disturbances. The 5VR1 can also be used to protect sensitive equipment from lightning strikes.
The 5VR1 is an effective and reliable power line filter module. It is easy to install and remove and can provide protection against power disturbances, line noise, over-voltages, and over-currents. The filter will reduce line noise levels and protect equipment from power disturbances, lightning strikes, and other electrical hazards.
The specific data is subject to PDF, and the above content is for reference
Part Number | Manufacturer | Price | Quantity | Description |
---|
5VR1 | TE Connectiv... | 14.41 $ | 38 | LINE FILTER 250VAC 5A CHA... |
LINE FILTER 250VAC 20A CHASS MNT
LINE FILTER 125/250VAC 4A TH
LINE FILTER 500VAC 100A CHASSIS
LINE FILTER 480VAC 50A CHASS MNT
LINE FILTER 480/520VAC 36A CHASS
LINE FILTER 480VAC 65A CHASS MNT