Allicdata Part #: | 6-1879062-4-ND |
Manufacturer Part#: |
6-1879062-4 |
Price: | $ 0.00 |
Product Category: | Capacitors |
Manufacturer: | TE Connectivity Passive Product |
Short Description: | CAP TANT 0.1UF 50V 20% 1206 |
More Detail: | 0.1µF Molded Tantalum Capacitors 50V 1206 (3216 Me... |
DataSheet: | 6-1879062-4 Datasheet/PDF |
Quantity: | 1000 |
Moisture Sensitivity Level (MSL): | 1 (Unlimited) |
Lead Free Status / RoHS Status: | Lead free / RoHS Compliant |
1 +: | 0.00000 |
Operating Temperature: | -55°C ~ 125°C |
Failure Rate: | -- |
Features: | General Purpose |
Manufacturer Size Code: | A |
Lead Spacing: | -- |
Height - Seated (Max): | 0.071" (1.80mm) |
Size / Dimension: | 0.126" L x 0.063" W (3.20mm x 1.60mm) |
Package / Case: | 1206 (3216 Metric) |
Mounting Type: | Surface Mount |
Lifetime @ Temp.: | -- |
Series: | TYTR |
ESR (Equivalent Series Resistance): | 10 Ohm |
Type: | Molded |
Voltage - Rated: | 50V |
Tolerance: | ±20% |
Capacitance: | 0.1µF |
Moisture Sensitivity Level (MSL): | -- |
Part Status: | Obsolete |
Lead Free Status / RoHS Status: | -- |
Packaging: | Tape & Reel (TR) |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
The 6-1879062-4 tantalum capacitor is a small, flat, cylindrical chip capacitor that is made from conductive tantalum powder. It is mainly used in electronics to store energy and to perform functions such as wave shaping, timing, bypassing, frequency selection, and biasing. The tannins have several advantages, including high-temperature stability, miniaturization, strong insulation, low electrical losses, wide frequency range, and a robust design. These features make it suitable for use in areas such as automotive electronics, military applications, medical electronics, instrumentation and control systems.
The 6-1879062-4 tantalum capacitor has an electrically conductive dielectric layer that is made up of tantalum metal oxide. This layer is called the anode. The anode is typically connected to a metal or other conducting material, called a cathode. When a voltage is applied to the capacitor, an electric field is created between the two layers, and electrical charge accumulates at the anode\'s layer. This static field causes the capacitor to store energy in the form of an electric field.
Tantalum capacitors are classified into “wet” and “dry”. The wet type uses a liquid electrolytic dielectric material, and the dry type uses an oxide dielectric. The wet type has better heat and voltage dissipating properties, but the dry type has superior capacitance and post-solder heat resistance. The 6-1879062-4 tantalum capacitor is the dry type. It features a limit of 6Vdc and a tolerance of ±5%. Its electrical characteristics include short circuit protection, superb ripple current performance, low ESR, and high capacitance density. The capacitor is also environmentally friendly, since the electrolyte is non-toxic and there is no concern of leakage.
The 6-1879062-4 tantalum capacitor is composed of two capacitor plates which are attached to each other through a dielectric layer. When a voltage is applied to the capacitor, the electric field across the dielectric layer increases, causing electric charges to accumulate on the desired plate. The electric field causes the attraction of free electrons from the other plate, resulting in an electric current. This current causes the capacitor to act as an energy storage device, which can be used to power electronic components or for other purposes.
The main purpose of the 6-1879062-4 tantalum capacitor is to store energy and to perform functions such as wave shaping, timing, bypassing, frequency selection, and biasing. The capacitor is typically used in circuits where capacitance values are needed in a small form factor, such as automotive electronics, military applications, medical electronics, instrumentation and control systems. Its robust design and high-temperature stability make it suitable in demanding environments. The capacitor is also able to withstand a certain amount of shock, vibration, and EMI/RFI, making it suitable for high-reliability applications.
In conclusion, the 6-1879062-4 tantalum capacitor is a small, flat, cylindrical chip capacitor mainly used in electronics for energy storage and the performance of wave shaping, timing, bypassing, frequency selection, and biasing. It has several advantages, including high-temperature stability, miniaturization, strong insulation, low electrical losses, wide frequency range, and a robust design. These features make it suitable for use in demanding applications such as automotive electronics, military applications, medical electronics, instrumentation and control systems.
The specific data is subject to PDF, and the above content is for reference
CAP TANT 6.8UF 10V 10% 08056.8F Molded T...
CAP TANT 4.70UF 16.0V4.7F Molded Tantalu...
CAP TANT 4.7UF 35V 20% 23124.7F Molded T...
CAP TANT 33UF 10V 20% 291733F Molded Tan...
CAP TANT 2.2UF 35V 10% RADIAL2.2F Molded...
CAP TANT 220UF 6.3V 20% 2917220F Molded ...