60AD18-4-L-020C

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Encoders

The 60AD18-4-L-020C encoder is a device used to measure rotational speed and position in drive systems. It is an incremental type of encoder, which is capable of detecting changes in the magnetic field of the motor and accurately measuring speed and displacement. The encoder has a rotating hollow magnet in its shaft that is surrounded by four electromagnets. As the shaft rotates, the magnet generates a varying magnetic field whose changes are detected by the four electromagnets. The variations in the magnetic field generate digital signals that are converted into digital outputs for use in controlling the speed and position of the motor.

The field of applications for the 60AD18-4-L-020C encoder is wide and varied. It has been used in a number of industrial processes, such as rollers, motors, pumps, and compressors, to control their speed and movement. It can also be used for machinery that needs more precise control, such as cranes or conveyor belts. Its small size and low cost make it a popular choice for smaller robotics projects, such as self-balancing robots or robotic arms.

In addition to measuring rotational speed and position, the 60AD18-4-L-020C encoder can also be used to yield relative positional measurements. This requires the installation of a reference encoder along with the primary encoder. The reference encoder is a fixed elecctrlouice which has its electrical angles fixed and unchanging. Its magnetic field is measured by the primary encoder which then converts the output into a quantity proportional to the displacement between the two encoders.

The working principle of the 60AD18-4-L-020C encoder consists of using a rotating magnetic field to generate electrical impulses that correspond to the angular position of the shaft. When the shaft rotates, it forces a variation of magnetic field around it which is then converted into electrical signals. The number of impulses generated by the encoder is directly proportional to the number of times the shaft has completed one rotation. The encoder also has the capability of providing an absolute measurement of the rotating angle, when coupled with a reference encoder.

The 60AD18-4-L-020C encoder is a highly reliable device that can provide accurate control over the speed and position of motors and other machinery. Its small size and low cost make it a popular choice for many applications. Its ability to measure both rotational speed and absolute rotation makes it a suitable device for a variety of uses.

The specific data is subject to PDF, and the above content is for reference