| Allicdata Part #: | 615HR010E-ND |
| Manufacturer Part#: |
615HR010E |
| Price: | $ 0.48 |
| Product Category: | Resistors |
| Manufacturer: | Ohmite |
| Short Description: | RES 0.01 OHM 1.5W 3% AXIAL |
| More Detail: | 10 mOhms ±3% 1.5W Through Hole Resistor Axial Curr... |
| DataSheet: |  615HR010E Datasheet/PDF |
| Quantity: | 19968 |
| 1 +: | $ 0.43200 |
| 10 +: | $ 0.38070 |
| 25 +: | $ 0.35010 |
| 50 +: | $ 0.31941 |
| 100 +: | $ 0.27644 |
| 250 +: | $ 0.23342 |
| 500 +: | $ 0.19656 |
| 1000 +: | $ 0.16339 |
| 5000 +: | $ 0.15664 |
| Series: | 60 |
| Packaging: | Bulk |
| Part Status: | Active |
| Resistance: | 10 mOhms |
| Tolerance: | ±3% |
| Power (Watts): | 1.5W |
| Composition: | Metal Element |
| Features: | Current Sense, Flame Proof, Non-Inductive, Safety |
| Temperature Coefficient: | -- |
| Operating Temperature: | -- |
| Package / Case: | Axial |
| Supplier Device Package: | Axial |
| Size / Dimension: | 0.750" L (19.05mm) |
| Height - Seated (Max): | -- |
| Number of Terminations: | 2 |
| Failure Rate: | -- |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
Through Hole Resistors are essential components in modern electronics. The 615HR010E is a Through Hole Resistor which is commonly used in a variety of applications. This section will discuss the application field of the 615HR010E and its working principle.
The 615HR010E is primarily used in the growth of RF and microwave circuitry. The resistor is able to facilitate the growth of signal frequency, power, and signal modulation, making it an ideal choice for radio-frequency amplifiers, radio filters, voltage-controlled oscillators, and low-noise amplifiers. In addition to the growth of RF and microwave circuitry, the 615HR010E is also used in industrial applications, where it is often found to be used to regulate currents in industrial machinery and motor controls.
The 615HR010E works by adjusting the resistance of a circuit. This is achieved by using a network of internal components which are designed to act as a conduit for current. The resistor resists the flow of current through its components, thereby altering the resistance of the circuit. The resistance of the circuit is determined by the amount of current passing through the resistor, as well as the number of components in the network, and the resistive values of each component.
In order to ensure that the 615HR010E works correctly, it is necessary to ensure that each component is correctly constructed. It is also necessary to ensure that each component is correctly connected to the other components in the network. In addition to this, it is also necessary to check the resistive values of each component in order to ensure that the resistance of the entire circuit is the same.
The 615HR010E is an invaluable part of modern electronics and can be used in a variety of applications. It is important to ensure that the resistor is correctly constructed and connected in order to ensure that it performs correctly. By following the above guidelines, the 615HR010E should provide reliable performance in the applications in which it is used.
The specific data is subject to PDF, and the above content is for reference
| Part Number | Manufacturer | Price | Quantity | Description |
|---|
| 615HR010E | Ohmite | 0.48 $ | 19968 | RES 0.01 OHM 1.5W 3% AXIA... |
| 615HR030E | Ohmite | 0.48 $ | 794 | RES 0.03 OHM 1.5W 3% AXIA... |
| 87204-615H | Amphenol FCI | 0.0 $ | 1000 | BERGSTIK II .100" SR STRA... |
| 615HR020E | Ohmite | 0.26 $ | 1000 | RES 0.02 OHM 1.5W 3% AXIA... |
| 69191-615HLF | Amphenol FCI | 0.42 $ | 1000 | BERGSTIK II |
| SG-615H-36.0000MC2 | Epson | 0.0 $ | 1000 | OSC XO 36.000MHZ CMOS TTL... |
RES WW 7W 5% TH68 kOhms 5% 7W Through Ho...
RES WW 7W 5% TH1.3 Ohms 5% 7W Through Ho...
RES 24.9 OHM 1/4W 1% AXIAL24.9 Ohms 1% 0...
RES 2.8 OHM 3W 0.5% WW AXIAL2.8 Ohms 0.5...
RES 750K OHM 1/4W 1% AXIAL750 kOhms 1% 0...
RES 340 OHM 1W 1% WW AXIAL340 Ohms 1% 1W...