61F-WLA AC110/220 E

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The 61F-WLA AC110/220 E is a low-water float-switch-controlled controller which is used to detect liquid levels in open or enclosed vessels. This type of controller is typically used to control liquid levels for boilers, tanks, ponds or other containers, but can also be used to detect other types of media, such as air or gas. The 61F-WLA is a multi-stage device, meaning it can support up to three independent levels or vessel capacities.

The 61F-WLA is used to monitor two liquid levels, which can be programmed to energize relays when certain level conditions are detected. For example, if you wanted to fill a boiler tank with water, you could use this controller to detect when the water reaches the optimal level, and then energize the necessary relays to turn off the water supply. Similarly, if you needed to detect when a tank had become empty, this controller could also be used to activate a relay, which could then be used to turn on a pump to refill the tank.

The 61F-WLA consists of two main components – the float switch and the solenoid. The float switch is the front end of the controller, which is mounted inside the vessel. This switch is responsible for detecting the various level conditions. It works by providing an electrical signal when the float rises and falls with the changing liquid level. This signal is then sent to the solenoid, which decides whether to energize or de-energize the relays, based on the programming and level range of the 61F-WLA.

The 61F-WLA also features a built-in combination wastewater and sediment test-point that can be used to measure the efficiency of the controller. The test-point is designed to test for contaminants in the liquid being monitored, and can also be used to detect levels of suspended solids in the water. The combination wastewater and sediment test-point helps users to assess the overall performance of the 61F-WLA and can assist in diagnosing any potential issues with the controller.

The 61F-WLA can be programmed with a range of settings, including the level of liquid to be monitored, the number of stages, the delay between stages, the type of level detection and the maximum value of the relays. In addition, the controller is equipped with a non-volatile memory feature so that all the settings are stored even if the power supply is interrupted.

The 61F-WLA can be used in a range of applications, including liquid level control, wastewater monitoring, and industrial process monitoring. It can also be used as an alarm for low liquid levels or for when high levels are detected. The 61F-WLA offers a reliable and cost-effective solution to liquid level monitoring and control, making it a popular choice for many applications.

The specific data is subject to PDF, and the above content is for reference