62445-3 Allicdata Electronics
Allicdata Part #:

62445-3-ND

Manufacturer Part#:

62445-3

Price: $ 0.06
Product Category:

Connectors, Interconnects

Manufacturer: TE Connectivity AMP Connectors
Short Description: 187 AMVAR FFTAB 020TPBR
More Detail: 0.187" (4.75mm) Quick Connect Male 12-15 AWG Crimp...
DataSheet: 62445-3 datasheet62445-3 Datasheet/PDF
Quantity: 1000
304000 +: $ 0.05168
Stock 1000Can Ship Immediately
$ 0.06
Specifications
Termination: Crimp
Insulation Diameter: --
Contact Finish: Tin
Contact Material: Brass
Color: --
Features: --
Mounting Type: Free Hanging (In-Line)
Insulation: Non-Insulated
Wire Gauge: 12-15 AWG
Series: Amplivar, Fastin-Faston
Length - Overall: 1.015" (25.78mm)
Tab Length: 0.458" (11.63mm)
Tab Thickness: 0.020" (0.51mm)
Tab Width: 0.187" (4.75mm)
Gender: Male
Terminal Type: Standard
Part Status: Active
Packaging: Reel
Description

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The 62445-3 Standard is an International Electrotechnical Commission’s (IEC) Standard for Quick Connectors, Quick Disconnect Connectors, and Terminals. It is designed to provide assurance of safety and performance when connecting electronic and electrical components. The standard applies to listed products, such as male and female polarized quick-connectors and quick-disconnect terminals.

The quick connect/disconnect terminals covered by the c62445-3 Standard are suitable for use as removably connected terminals with applied pressure using a variety of hand tools. The standard applies to contacts with a current capacity not exceeding 200 amps and a voltage rating up to 600 volts when used in an environmental temperature of minus 55 degrees to 105 degrees Celsius. The standard also stipulates that the listed products should have the following properties:

  • They must be thermally insulated from possible contact with connection points.
  • They must be mechanically assembled so that they are not opened by more than the specified force.
  • The terminals must be designed to conform to applicable safety requirements.
  • The contacts must be able to withstand the specified current and voltage rating.
  • Manufacturers must provide written instruction stating the tolerances, assembly, and operation.
  • The contact surfaces must be corrosion resistant.
  • The quick-connect/disconnect terminals must be compatible with available tools.
  • Simple and safe insulation of the terminals.

The primary purpose of the 62445-3 Standard is to ensure safety and performance when connecting components. This is done through the test requirements specified in the standard. These tests include mechanical tests to establish the product’s durability, electrical tests to verify current ratings, environmental tests to assure the product is suitable for the intended environment, and insulation tests to ensure safe insulation between the terminals and the connected components.

In addition to providing assurance of safety and performance, the 62445-3 Standard also specifies construction requirements intended to ensure accurate and reliable operation. These construction requirements are specified in the form of dimensional drawings and must be adhered to by the manufacturer. This includes the size and shape of the female quick-connect/disconnect terminal head, the entry depth of the base, the entry angle for the female terminal, the shape and size of the female terminal pin, the minimum diameter of the male terminal pin, and the minimum diameter and depth of the female terminal clamp. The standard also specifies the maximum tensile strength and the maximum permissible working angle between the female terminal and the male terminal.

The 62445-3 Standard is an important standard for the safety and performance of quick-connect/disconnect terminals. It ensures that the products meet the safety and performance standards established by the IEC and provides assurance that the products are suitable for their intended applications. Manufacturers must adhere to the standard in order to ensure that their products meet the requirements of the standard. This is done through testing and ensuring that the products adhere to the design and construction requirements stipulated by the standard.

The specific data is subject to PDF, and the above content is for reference

Related Products
Search Part number : "6244" Included word is 17
Part Number Manufacturer Price Quantity Description
624428-2 TE Connectiv... 155.76 $ 1000 LIMITADOR DA FACA
62448 Makeblock Co... 1.38 $ 1000 MEGAPI ACRYLIC BRACKET
DEMOBOARD TLE 6244X Infineon Tec... 0.0 $ 1000 BOARD DEMO FOR TLE 6244XT...
62447-4 TE Connectiv... 0.04 $ 1000 CONN QC TAB 16-22AWG 0.18...
62445-3 TE Connectiv... 0.06 $ 1000 187 AMVAR FFTAB 020TPBR0....
62447-2 TE Connectiv... 0.06 $ 1000 CONN QC TAB 16-22AWG 0.18...
62443-2 TE Connectiv... 0.06 $ 1000 CONN QC TAB 10-12AWG 0.18...
6244-48-02 Pomona Elect... 14.55 $ 49 TEST LEAD BANANA/GRAB 48"...
031-6244 Amphenol RF ... 7.68 $ 1000 CONN BNC PLUG STR 50 OHM ...
62440 Weidmuller 3.35 $ 1000 CONN BARRIER STRIP 3CIRCU...
6244-48-2 Pomona Elect... 7.62 $ 10 TEST LEAD BANANA TO GRABB...
6244-48-0 Pomona Elect... 7.62 $ 9 TEST LEAD BANANA TO GRABB...
62445 Makeblock Co... 0.9 $ 1000 WORM GEARED MOTOR BRACKET...
62443-1 TE Connectiv... 0.08 $ 1000 CONN QC TAB 10-12AWG 0.18...
624424-1 TE Connectiv... 214.83 $ 1000 VALVE
62447-1 TE Connectiv... 0.04 $ 1000 CONN QC TAB 16-22AWG 0.18...
62445-1 TE Connectiv... 0.06 $ 1000 CONN QC TAB 12-15AWG 0.18...
Latest Products
170266-1

CONN QC RCPT 10-12AWG 0.2500.250" (6.35m...

170266-1 Allicdata Electronics
DVF18-188-C

CONN QC RCPT 18-22AWG 0.1870.187" (4.75m...

DVF18-188-C Allicdata Electronics
DV18-188B-C

CONN QC RCPT 18-22AWG 0.1870.187" (4.75m...

DV18-188B-C Allicdata Electronics
0190230087

CONN QC TAB 18-22AWG 0.250 1=1000.250" (...

0190230087 Allicdata Electronics
7818

CONN QC TAB 0.250 SOLDER0.250" (6.35mm) ...

7818 Allicdata Electronics
CC2641-000

QUICK CONNECT TERM0.250" (6.35mm) Quick ...

CC2641-000 Allicdata Electronics