62B11-LPP-100S

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Encoders are widely used in many industrial automation applications for precise measurement and control, such as robotics and other closed loop control systems. 62B11-LPP-100S is a typical high resolution rotary encoder which belongs to this family. It is used in motion control, precise position measurement and shaft angle sensing applications.

62B11-LPP-100S encoder adopts photoelectric encoding principle and uses optical transmissive detection method. It consist of two basic parts – an optical encoder and a receiver. The optical encoder is composed of an emitter (LED) and a decoder (code wheel). As the rotary shaft turns, the light emitted from the LED is interrupted and detected by the code wheel. Each wheel segment will send out a fixed number of pulses as it passes through the sensor. The receiver is a photo-transistor, which converts the light signals from the code wheel into electric pulses or signals. The number of electric pulses is proportional to the mechanical rotation.

62B11-LPP-100S encoder typically uses quadrature signals such as A-phase and B-phase, the two signals always have a 90-degree phase difference. In this case, by calculating the rising and falling edges of A-phase and B-phase signal, the direction of rotation can be determined with a higher resolution and accuracy. This data can be used in closed loop control systems or other applications which require precise motion control.

In addition, 62B11-LPP-100S encoder provides customized outputs such as analog output signals, frequency output signals and mark-space output signals.The analog output signal is a sine wave which provides 0~5V output voltage corresponding to the rotation angle of the rotary shaft. The frequency output signal provides two frequency signals (High frequency and low frequency) corresponding to the rotary shaft angle. The mark-space output signal is a pulse output corresponding to the rotary shaft angle.

62B11-LPP-100S encoder is widely used in motion control system and position measurement applications, such as industrial robots, CNC machines, machine tools, and servo motors. It can be used for position and speed closed loop control of the motion. It is widely used for applications that require high resolution and accuracy.

The specific data is subject to PDF, and the above content is for reference