Allicdata Part #: | 62N30-040S-ND |
Manufacturer Part#: |
62N30-040S |
Price: | $ 57.30 |
Product Category: | Sensors, Transducers |
Manufacturer: | Grayhill Inc. |
Short Description: | OPTICAL ENCODER |
More Detail: | N/A |
DataSheet: | 62N30-040S Datasheet/PDF |
Quantity: | 1000 |
1 +: | $ 52.09470 |
Series: | 62N |
Part Status: | Active |
Encoder Type: | Optical |
Output Type: | Quadrature (Incremental) |
Pulses per Revolution: | 12 |
Voltage - Supply: | 5V |
Actuator Type: | 1/4" Dia Flatted End |
Detent: | Yes |
Built in Switch: | Yes |
Mounting Type: | Surface Mount |
Orientation: | Vertical |
Termination Style: | Cable Leads |
Rotational Life (Cycles Min): | 1M |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
Encoders are used with automation systems, robotics, and other motion control applications to measure the speed or position of a rotating shaft or object. The 62N30-040S encoder is an incremental encoder designed to provide precise, linear-position feedback in applications that require high accuracy and repeatability. This article will discuss the application field and working principle of the 62N30-040S encoder.
The 62N30-040S encoder is a single-turn, exact-position type incremental encoder. It has two analog outputs, two digital outputs, and a Hall-effect switch output. The encoder is capable of delivering up to a maximum of 28,000 PPR counts per revolution with a resolution of 8µm. It is designed to operate in a wide variety of electromagnetic environments and is suitable for use in a range of applications including metal cutting, press brakes, industrial motion control, and CNC machine tools.
The encoder is designed to be compact, low cost, and easy to install. It has a maximum shaft load rating of 5Nm, a radial force bearing of 10N, and an axial force bearing of 5N. The encoder is also IP67 rated, making it dust-tight and waterproof. Its maximum speed is 25,000 RPM, and it has a low voltage range of 8-30V DC.
In regards to its working principle, the 62N30-040S uses the principle of optical recognition. This means that light is emitted onto a special code wheel. This code wheel contains a variety of patterns and every time the wheel rotates, the patterns pass in front of the light source. The reflected light passes through sensors which then report the position of the code wheel and, therefore, the position of the device that the encoder is installed in. This data is sent to the controller and is then used to control the position of the motor, machine, or other device.
The 62N30-040S encoder is an excellent choice for applications that require high accuracy and repeatability. It is capable of providing precise linear-position feedback and is suitable for a variety of electromagnetic environments. It is compact, low cost, and easy to install. With its two analog outputs, two digital outputs, and Hall effect switch output, it is an excellent choice for automation systems, robotics, and other motion control applications.
The specific data is subject to PDF, and the above content is for reference
Part Number | Manufacturer | Price | Quantity | Description |
---|
62N30-040CH | Grayhill Inc... | 57.3 $ | 5 | OPTICAL ENCODER |
62N30-020C | Grayhill Inc... | 56.55 $ | 1000 | OPTICAL ENCODER |
62N30-P | Grayhill Inc... | 56.55 $ | 1000 | OPTICAL ENCODER |
62N30-040S | Grayhill Inc... | 57.3 $ | 1000 | OPTICAL ENCODER |
OPTICAL ENCODER
ENCODER HT 3CH 512CPR 11MM
ENCODER DGTL 2CH150LPI BENT LD
ENCODER KIT 3CH INCREMENT 400CPR
ENCODER MECH 15-PULSE 30-DETENT
ENCODER ROTARY 1000PPR 9V