62R15-01-040S

Series:	62R
Part Status:	Active
Encoder Type:	Optical
Output Type:	Quadrature (Incremental)
Pulses per Revolution:	24
Voltage - Supply:	5V
Actuator Type:	1/4" Dia Flatted End
Detent:	Yes
Built in Switch:	No
Mounting Type:	Panel Mount
Orientation:	Vertical
Termination Style:	Cable Leads
Rotational Life (Cycles Min):	1M

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Introduction:Encoders can be used for detecting the position or speed of a motor or other mechanical part. The 62R15-01-040S encoder is an example of a rotary encoder that can be employed for such purposes. This article explains the application field and working principle of the 62R15-01-040S encoder. Application Field:The 62R15-01-040S is a single-turn rotary encoder with a cylindrical housing and a squat, short shaft mounted in the lower part of the housing. Its diameter is 61 mm, with a resolution of 3200 PPR or pulses per rotation. It is a low-cost, compact encoder suitable for measuring angular positions. It can be used in a wide range of applications, from motor speed control, position, or angle sensing. Working Principle: The angular position of the 62R15-01-040S encoder is measured based on two pre-programmed reference positions that are detected by two sensors: one for the reference position and the other for the actual position. When the shaft rotates, the sensors detect changes in position and the angular position of the shaft is determined from these measurements. The output of the two sensors is compared to each other and the result is passed to the encoder’s counter. This counter calculates the number of pulses per rotation (PPR) and outputs a corresponding signal. This signal can be used to control the speed or position of a motor, or any other device that requires precise, reliable angle measurement. Conclusion: The 62R15-01-040S encoder is an affordable, reliable, and compact rotary encoder that can be used to measure angular positions of motors and other mechanical parts. It works by sensing two pre-programmed reference positions and calculating the number of pulses per rotation. This signal can be used to control the speed or position of a motor or any other device that requires precision angle measurement. With its many application possibilities, the 62R15-01-040S is an ideal choice for a wide range of applications.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description