632N3I013M50000

Frequency Stability:	±50ppm
Current - Supply (Disable) (Max):	15µA
Height - Seated (Max):	0.047" (1.20mm)
Size / Dimension:	0.126" L x 0.098" W (3.20mm x 2.50mm)
Package / Case:	4-SMD, No Lead
Mounting Type:	Surface Mount
Ratings:	--
Current - Supply (Max):	8mA
Operating Temperature:	-40°C ~ 85°C
Series:	632
Voltage - Supply:	2.5V
Output:	HCMOS
Function:	Enable/Disable
Frequency:	13.5MHz
Type:	XO (Standard)
Base Resonator:	Crystal
Part Status:	Active
Packaging:	Tape & Reel (TR)

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Introduction

Oscillators are electronic circuits that generate a periodic but non-steady signal of a given frequency, a range of such signals, or even can be tuned to the exact frequency required. Every oscillator design has a distinct frequency response, which requires careful tuning of values to achieve the desired output. 632N3I013M50000 application field and working principle is a type of oscillator circuit that can be used as a wide variety of electronic and electrical circuit applications. The circuit can be used either as an oscillator, a voltage-controlled amplifier, a voltage-controlled oscillator, or as an electronic switch.

632N3I013M50000 Basics

The 632N3I013M50000 IC is a digital-to-analog voltage conversion device that converts a digital input signal (IN) to an analog output voltage (Vout). The IC is also capable of sensing the voltage of the load connected to the output and can then adjust its output voltage accordingly. This makes the IC incredibly versatile and can be used for a wide range of applications including voltage-controlled oscillators, voltage-controlled amplifiers, and electronic switches.The 632N3I013M50000 IC consists of an input (IN), output (Vout), power (VREF) and regulator (RER) pins. The input pin receives the digital input signal which can range 0 to 5V. This digital signal is then converted into an analog voltage which is applied to the output pin. The power pin provides the power to the IC and is typically connected to a regulated power supply. The regulator pin is used to control the range of the output voltage and can be connected to an external reference voltage or potentiometer.

632N3I013M50000 Working Principle

The 632N3I013M50000 IC works by comparing the voltage on the input pin (IN) with a reference voltage (VREF). If the voltage on the input is greater than the reference voltage then the output voltage increases. Conversely, if the voltage on the input is less than the reference voltage, then the output voltage decreases. The output voltage can be adjusted by changing the value of the reference voltage (VREF).The 632N3I013M50000 can also be used to generate an oscillating signal. This is achieved by alternating the input voltage between two values. When the input voltage is above the reference voltage, the output voltage increases and when it is below the reference voltage, the output voltage decreases. This creates a repeating pattern of increasing and decreasing output voltages which form an oscillating signal.

632N3I013M50000 application field

The 632N3I013M50000 IC can be used in a variety of different applications. As a voltage-controlled oscillator, the output voltage of the chip can be adjusted by changing the reference voltage. This allows for precise tuning of the output frequency, allowing for diverse frequencies to be generated by the chip. The chip can also be used as a voltage-controlled amplifier, allowing for adjustable gain control, and as an electronic switch, which can be used to switch between specific voltages or current levels.The 632N3I013M50000 IC is commonly used in audio applications due to its ability to generate different frequencies. It is used in a variety of audio circuits such as radio receivers, digital synthesizers, and sound effects. It is also suitable for use in other applications such as digital displays, motor control, and signal conditioning.

Conclusion

The 632N3I013M50000 IC is a versatile and widely used oscillator circuit that can be used for a variety of applications. It is capable of generating different frequencies, amplifying signals, providing adjustable gain control, and acting as an electronic switch. The circuit is commonly used in audio applications, such as in radio receivers, digital synthesizers, and sound effects. The 632N3I013M50000 IC is a useful and powerful circuit that can be used for a variety of applications.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description