633L148A6A2T

Frequency Stability:	±20ppm
Current - Supply (Disable) (Max):	--
Height - Seated (Max):	0.039" (1.00mm)
Size / Dimension:	0.126" L x 0.098" W (3.20mm x 2.50mm)
Package / Case:	6-SMD, No Lead
Mounting Type:	Surface Mount
Ratings:	--
Current - Supply (Max):	66mA
Operating Temperature:	-10°C ~ 60°C
Series:	633
Voltage - Supply:	2.5V
Output:	LVDS
Function:	Enable/Disable
Frequency:	148.3516MHz
Type:	XO (Standard)
Base Resonator:	Crystal
Part Status:	Active
Packaging:	Tape & Reel (TR)

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Introduction to 633L148A6A2T

The 633L148A6A2T is an oscillator used to generate a constant frequency signal. It is used in a variety of applications, including radio transmitters, television receivers, and radar systems, to provide the necessary clock signal. The device is also used to create a frequency reference, allowing for accurate frequency measurement and comparison.

Application Fields of 633L148A6A2T

The 633L148A6A2T oscillator is a widely used device and has a range of applications in different industries. In the radio industry, the oscillator is used in transmitters and receivers, allowing for the transmission of data signals over frequencies. In television receivers, it is used to generate the synchronization signals required by the receiver. In radar systems, it is used to generate a constant frequency signal that is used to measure the distance and direction of objects.The oscillator is also used in timekeeping devices, such as watches, clocks, and embedded systems. These devices use the oscillator to provide a reliable and accurate frequency reference for measuring time. In computer systems, the oscillator is used to generate a clock signal that is used to control the system’s circuitry.

Working Principle of 633L148A6A2T

The 633L148A6A2T oscillator works by using a voltage-controlled oscillator (VCO) circuit. This circuit is composed of a resonator circuit, a control voltage source, and an amplifier. The resonator circuit is used to generate a signal of a specific frequency, based on the values of the components in the circuit. The control voltage source is used to adjust the frequency of the signal generated by the resonator circuit. The amplifier is used to boost the signal generated by the resonator circuit to a level that is appropriate for the application.The oscillator is constructed with CMOS technology and uses a quartz crystal as the resonator. The crystal is connected to the inputs of the VCO circuit and the output is taken from the amplifier. The frequency of the signal generated by the oscillator is determined by the capacitance of the crystal, as well as the bias currents applied to the crystals.

Conclusion

The 633L148A6A2T is an oscillator used to generate a constant frequency signal. It is used in a wide range of applications, including radio transmitters, television receivers, and radar systems. The oscillator is constructed with CMOS technology and uses a quartz crystal as the resonator, which allows for a reliable and accurate frequency reference to be generated. The device is able to generate a signal of a specific frequency and the frequency can be adjusted with a control voltage.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description