636M3C027M00000

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Oscillators allow an independent circuit or device to generate a repetitive output signal without an external source of input. This type of device is widely used in a variety of applications, such as in telecommunications, radio, and audio applications, and even in spacecraft electronics. The 636M3C027M00000 oscillator is one of the most commonly used oscillators in these fields. In this article, we will discuss the application field and working principle of the 636M3C027M00000 oscillator.

Application Fields of 636M3C027M00000 Oscillators

The 636M3C027M00000 oscillator is a voltage controlled quartz crystal oscillator (VC-XO) with a frequency range of 10 to 50 MHz. It can be used to generate highly stable and predictable signals. It is used in a wide range of applications, including radio broadcasting, cellular phones, microwave and satellite communications, and computer clock systems. It is also widely used in consumer electronics, such as televisions, and audio systems. In addition, this type of oscillator is well suited for automotive applications, such as engine control and ignition systems.

Working Principle of 636M3C027M00000 Oscillators

The 636M3C027M00000 oscillator is based on a VC-XO circuit that utilizes a quartz crystal to generate an output signal. The circuit consists of two transistors, an amplifier, and a quartz crystal. The transistors act as switches to drive the voltage across the quartz crystal. The crystal is used as a resonant device to generate a output signal at a particular frequency. When a voltage is applied to the crystal, it creates mechanical vibrations at a specific frequency, which is determined by the crystal\'s physical and electrical properties. The voltage across the crystal is then amplified by the amplifier, and the resulting output is a periodic waveform with a precise frequency that is determined by the quartz crystal.

The 636M3C027M00000 is a voltage controlled oscillator, meaning that the frequency can be adjusted by varying the input voltage. This is done by adjusting the bias current across the transistors, which determines the voltage across the quartz crystal and the resulting frequency of the output signal. By carefully tuning the bias current, the output frequency can be precisely controlled, allowing for highly accurate and stable oscillations.

Conclusion

The 636M3C027M00000 oscillator is a widely used voltage-controlled oscillator with a frequency range of 10 to 50 MHz. It is used in a variety of applications, from radio broadcasting to consumer electronics and automotive applications. The oscillator is based on a VC-XO circuit that utilizes a quartz crystal to generate a precise and stable output signal. It is capable of producing highly stable and predictable signals that can be precisely controlled by varying the input voltage.

The specific data is subject to PDF, and the above content is for reference