637V18436C2T

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Oscillators are circuits that produce an alternating electrical waveform. One common type of oscillator is the 637V18436C2T oscillator, which is used to generate a continuous wave at a specified frequency or to provide a clock signal for synchronizing different circuits.

The 637V18436C2T is a dual timer-oscillator module. It consists of two independent circuits, each with a precision voltage-controlled oscillator (VCO) and a precision reference oscillator (RCO). The VCO is the primary generator which produces an output signal at a frequency determined by a voltage control input. The output frequency of the VCO is typically stable enough that it can be used in frequency synthesis applications. The RCO is a precision reference oscillator providing a stable output signal to assist in phase synchronization.

The 637V18436C2T module also includes a control input which adjusts the VCO frequency and phase offset, and provides three logic outputs for synchronization and triggering. This dual-timer oscillator module is used in a wide variety of applications, including frequency synthesis, frequency hopping, digital phase shifters, clock synchronization, and spread-spectrum modulation. In addition, it can be used in multiband radios and other communication systems, as well as in embedded systems.

In terms of working principle, the 637V18436C2T oscillator can be programmed to generate an output frequency from 500kHz to 200MHz. The control input is used to adjust the oscillator’s frequency and phase offset. This allows the user to create specific frequency patterns, such as a chirp signal or a stepped frequency signal. The VCO produces an output signal with a frequency that corresponds to the control input voltage, while the reference oscillator provides a stable output signal.

The dual timer-oscillator module is also equipped with three logic outputs used for synchronization and triggering. This feature allows for the synchronization of sequential events, such as analog to digital conversion, or the generation of repetitive waveforms. The module also has error detection and low jitter performance features, making it suitable for many precision timing applications.

In summary, the 637V18436C2T oscillator is a dual timer-oscillator module that can be used to generate a continuous wave at a specified frequency or to provide a clock signal for synchronizing different circuits. It is equipped with a precision voltage-controlled oscillator and a precision reference oscillator, as well as a control input and three logic outputs. It is suitable for a wide variety of applications, including frequency synthesis, frequency hopping, digital phase shifters, clock synchronization, spread-spectrum modulation, multiband radios, and embedded systems.

The specific data is subject to PDF, and the above content is for reference