653P167A6A2T

Series:	653
Packaging:	Tape & Reel (TR)
Part Status:	Active
Type:	XO (Standard)
Function:	Enable/Disable
Output:	LVPECL
Voltage - Supply:	2.5V
Frequency Stability:	±20ppm
Operating Temperature:	-10°C ~ 60°C
Current - Supply (Max):	88mA
Ratings:	--
Mounting Type:	Surface Mount
Package / Case:	6-SMD, No Lead
Size / Dimension:	0.197" L x 0.126" W (5.00mm x 3.20mm)
Height - Seated (Max):	0.055" (1.40mm)
Current - Supply (Disable) (Max):	--

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Oscillators are electronic circuits designed to generate and output a certain type of signal waveform. 653P167A6A2T oscillators are specifically used for fundamental clock and timing applications.The 653P167A6A2T is designed to generate predictable clock signals. A 653P167A6A2T oscillator is composed of a transistor or integrated circuit, a fixed capacitive feedback network, a DC voltage source, and an output buffer. The circuit is usually built in a small package or SMD-type component.When the oscillator is powered, the transistor or integrated circuit (IC) is switched on. This causes current to flow through the capacitive network, which eventually builds up a charge. When the capacitive network is fully charged, the current stops flowing and the transistor or IC is switched off. This starts the oscillation cycle, where the charge stored in the capacitive network discharges and the current begins to flow again. This cycle is repeated until the oscillator is powered off.The frequency at which the oscillator switches is determined by the type and size of capacitance supplied to the feedback network, as well as the configuration of the transistor or IC. This allows for precision control of the oscillation frequency.The output of the oscillator is usually a fixed-width square wave with a fixed frequency. This can be used to drive other circuits, as a frequency-referencing signal, or as an input for certain types of digital logic circuits.The 653P167A6A2T oscillators are typically used in portable devices and digital circuits. They are used for measuring, counting, and processing digital data in various applications, such as satellite communications, automatic meter reading systems, vehicle diagnostics, intelligent sensors, and industrial automation systems.The 653P167A6A2T oscillator is commonly used in time-stamping applications, particularly when accuracy is critical. The oscillator can be configured to accurately mark time with very low jitter values and noise levels. This makes it a popular choice for use in sensitive data acquisition applications such as medical instruments, where time intervals must be accurately measured.They are also commonly used in digital television systems, where they are used to provide time signals for Sync Frames, Picture Tubes, and Subcarriers. This ensures synchronization between the various signals being broadcast by the system.Overall, the 653P167A6A2T oscillator is a versatile and reliable device that is used in a wide range of applications. Its high level of accuracy and low noise levels make it the ideal choice when tight control of timing signals is required. With its compact size and low energy requirements, it is the preferred choice of oscillator for countless digital systems.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description