653P20003I2T

Frequency Stability:	±50ppm
Current - Supply (Disable) (Max):	--
Height - Seated (Max):	0.055" (1.40mm)
Size / Dimension:	0.197" L x 0.126" W (5.00mm x 3.20mm)
Package / Case:	6-SMD, No Lead
Mounting Type:	Surface Mount
Ratings:	--
Current - Supply (Max):	88mA
Operating Temperature:	-40°C ~ 85°C
Series:	653
Voltage - Supply:	2.5V
Output:	LVPECL
Function:	Enable/Disable
Frequency:	200MHz
Type:	XO (Standard)
Base Resonator:	Crystal
Part Status:	Active
Packaging:	Tape & Reel (TR)

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Introduction

Oscillators are circuits that produce a periodic output signal. They are used in a variety of applications, ranging from music equipment to microprocessors. Oscillators are usually classified into two categories: LC oscillators and LC resonators. These two types of oscillators differ in terms of their own design and construction, but they also have different applications and working principles.

653P20003I2T Oscillator

The 653P20003I2T Oscillator is a type of low power LC oscillator, which is also known as the Colpitts oscillator. It uses an inductor (L) and two capacitors (C1 and C2) as its main components, and the oscillation is achieved by the interaction of the inductor and capacitors. The basic working principle of the 653P20003I2T Oscillator is based on the theory of electromagnetism and the oscillation frequency is determined by the values of the inductance and capacitances.

Application Field of 653P20003I2T Oscillator

The 653P20003I2T Oscillator is mainly used in low power applications, such as portable radios, PPM encoder, automotive communication systems, audio amplifiers and Wireless Keyboards. It is also used in signal timing applications, such as crystal oscillators, clocks, timers and frequency counters.

Working Principle of 653P20003I2T Oscillator

The 653P20003I2T Oscillator works on the principle of feedback. The induction of the inductor and the capacitance of the two capacitors determine the frequency of the oscillator. When the current flowing through the inductor increases, it induces a voltage across its terminals. This voltage is then applied to the two capacitors which then charge or discharge depending on the direction of the current flow. This process continues until the capacitors are fully charged or discharged or until the current reaches a maximum value. When either of these conditions is reached, the inductor begins to discharge and the cycle starts again. This process continues in a cyclic fashion, producing an oscillating output signal with the same frequency every time the cycle completes.

Conclusion

The 653P20003I2T Oscillator is a type of low power LC oscillator and is mainly used in low power applications. It works on the principle of electromagnetism, and is based on the interaction between an inductor and two capacitors. The frequency of the oscillator is determined by the values of the inductance and capacitances.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description