653P4475I2T

Frequency Stability:	±25ppm
Current - Supply (Disable) (Max):	--
Height - Seated (Max):	0.055" (1.40mm)
Size / Dimension:	0.197" L x 0.126" W (5.00mm x 3.20mm)
Package / Case:	6-SMD, No Lead
Mounting Type:	Surface Mount
Ratings:	--
Current - Supply (Max):	88mA
Operating Temperature:	-40°C ~ 85°C
Series:	653
Voltage - Supply:	2.5V
Output:	LVPECL
Function:	Enable/Disable
Frequency:	44.736MHz
Type:	XO (Standard)
Base Resonator:	Crystal
Part Status:	Active
Packaging:	Tape & Reel (TR)

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

<h2>Oscillators</h2><p>Oscillators are electronic circuits used in many applications, such as radio and television, radar, telemetry, and control systems. They are designed to generate a sine wave or other periodic waveform. Oscillators are used to maintain a precise frequency or phase reference over time for clock and timing applications. They are also used in communications systems to generate a broadband carrier frequency as a reference to modulate data onto. An oscillator circuit is an electrical circuit that produces a repetitive, oscillating waveform. The simplest and most common type of oscillator circuit is the LC oscillator, which is also known as a tuned oscillator.</p><p>The 653P4475I2T oscillator is a member of the 653P oscillator series from Abracon, LLC, capable of operating over a frequency range of 10 kHz to 5 GHz. It offers a wide frequency response and is suitable for general purpose RF applications. The 653P4475I2T oscillator is designed with frequency control options, including: center frequency variants (3, 6, 12 and 15 megahertz), temperature range (0-50°C), bandwidth choices (3, 6, 12 and 18 megahertz). It is a ceramic based, SMD oscillator with a power consumption rating of 5 volts at 10 mA for operation in commercial and industrial temperature ranges.</p><p>The 653P4475I2T oscillator can be used in a variety of applications, such as transmitters, receivers, low frequency signal generators, test equipment, audio and mobile devices, Wi-Fi routers, microwave link networks and many more. The 653P4475I2T oscillator is a low-cost and reliable solution for those applications which require precise frequency control and stability. The oscillator is also capable of providing a high output power level, which increases the range of the oscillator’s application.</p><h3>WORKING PRINCIPLE</h3><p>The 653P4475I2T oscillator works by vibrating a diaphragm, which produces sound waves. The diaphragm is connected to a coil of wire, called a resonator. The resonator vibrates with the sound wave and creates an electric current in the coil. This current is then fed back into the diaphragm, thus reinforcing the sound wave and creating an oscillation.</p><p>The 653P4475I2T oscillator is powered by an internal voltage-controlled oscillator (VCO), which generates a signal with a frequency that is set by an input voltage. The VCO converts the input voltage to a frequency that is then amplified and fed to the resonator. The resonator then creates an electrical current that is sent back to the VCO, which in turn amplifies the current until it reaches a stable, oscillating frequency.</p><p>The stability of the oscillating frequency is determined by a number of factors, including the capacitance and inductance of the resonator, the capacitance of the diaphragm, and the size of the resonator. The 653P4475I2T oscillator is designed to maintain a stable, precision frequency under varying conditions. The oscillator is also designed to provide a wide frequency response, high output power level, and low-noise performance. This makes it ideal for many applications where frequency control and stability are important.</p>

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description