655E12506C2T

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Oscillators can be used in many applications to create periodic signals. The 655E12506C2T oscillator is a type of oscillator that can be used for these applications. This oscillator generates a sinusoidal wave output with a frequency of 12.5 MegaHertz.

The 655E12506C2T oscillator has several advantages over other types of oscillators. Firstly, it uses less power to operate, making it more cost-effective. Secondly, it does not require any external components for operation, making it easier and faster to set up and use. Finally, it has a very low temperature coefficient, meaning that it is not affected by changes in temperature.

In terms of what it can be used for, applications for the 655E12506C2T oscillator include radio receivers and other digital communications systems. It is also used in imaging systems such as medical scanning equipment. Additionally, it can be used as a reference frequency for precision timing systems and as a frequency control element in microwave applications.

The 655E12506C2T oscillator works by using a quartz quartz resonator. The quartz resonator consists of two quartz plates with an electrode in between. When a voltage is applied to the electrode, the quartz plates vibrate rapidly. The electrical energy of the voltage is converted to mechanical energy causing the plates to vibrate. This vibration causes a periodic sinusoidal wave to be generated.

The quartz resonator is attached to electrodes which provide the input drive voltage. The drive voltage is used to generate the oscillation. As the drive voltage is increased, the frequency of the oscillator increases. The frequency can be adjusted by varying the amount of electric voltage that is applied to the resonator.

The frequency of the 655E12506C2T oscillator can also be controlled using a feedback resistor connected to the output of the oscillator. The feedback resistor measure the frequency of the output waveform and adjust it accordingly. This ensures that the frequency of the oscillator remains consistent.

In conclusion, the 655E12506C2T oscillator is a type of oscillator that is used in many applications for its low power consumption and low temperature coefficient. It is used in medical scanning equipment, radio receivers, and microwave applications. It generates a sinusoidal wave output with a frequency of 12.5 MegaHertz that can be adjusted using the amount of drive voltage applied to it. The frequency can also be controlled using a feedback resistor.

The specific data is subject to PDF, and the above content is for reference