655P156E3I2T

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Oscillators are devices that generate periodic waveforms, typically using either an electronic or mechanical method. The type of oscillator discussed in this article is the 655P156E3I2T oscillator, which is a type of electronic oscillator. It is made up of a number of components, including a voltage-controlled oscillator (VCO), a phase-locked loop (PLL), and a feedback network.

655P156E3I2T Application Field

The 655P156E3I2T oscillator is used in a variety of applications, including radio and television receivers; communication systems; control systems; and navigation systems. In many systems, it is used as a timing element to set the frequency of a system. It can also be used for providing stable frequencies for various functions, such as pulse width modulation (PWM) and pulse frequency modulation (PFM).

The 655P156E3I2T oscillator is particularly useful in microwave applications due to its ability to provide stable and accurate frequencies. It is also used in precision frequency synthesis applications, where a high degree of accuracy is important. The oscillator’s frequency is adjustable, making it suitable for testing and calibration in electronic circuits.

Working Principle

At the heart of the 655P156E3I2T oscillator is a voltage-controlled oscillator (VCO), which is a type of oscillator that is driven by a voltage signal. The voltage signal is used to control the frequency of the oscillator. The VCO is connected to a phase-locked loop (PLL), which is used to provide feedback for the VCO and to maintain a constant frequency. The PLL consists of an amplifier, a mixer, and a low-pass filter.

The amplifier in the PLL is used to amplify the signal from the VCO. This amplified signal is then fed to the mixer, where the VCO signal is mixed with a reference signal. The output of the mixer is then passed through a low-pass filter, which is used to remove any unwanted high frequency components. The output of the low-pass filter is then fed back to the VCO, where the frequency is adjusted based on the feedback.

The frequency of the 655P156E3I2T oscillator is also affected by the frequency of the reference signal. The reference signal is typically generated by a frequency generator, which is adjusted to produce the desired frequency. This frequency is input into the PLL, which is used to maintain a constant frequency. The frequency of the reference signal also affects the frequency of the output signal.

The output of the 655P156E3I2T oscillator is highly stable and can be accurately tuned to meet requirements in a range of applications. The oscillator can be used for a variety of signal processing, ranging from radio and television applications to testing and calibration in electronic circuits.

The specific data is subject to PDF, and the above content is for reference