655V156G2I3T

Frequency Stability:	±100ppm
Current - Supply (Disable) (Max):	--
Height - Seated (Max):	0.055" (1.40mm)
Size / Dimension:	0.197" L x 0.126" W (5.00mm x 3.20mm)
Package / Case:	6-SMD, No Lead
Mounting Type:	Surface Mount
Ratings:	--
Current - Supply (Max):	66mA
Operating Temperature:	-40°C ~ 85°C
Series:	655
Voltage - Supply:	3.3V
Output:	LVDS
Function:	Enable/Disable
Frequency:	156.26953MHz
Type:	XO (Standard)
Part Status:	Active
Packaging:	Tape & Reel (TR)

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

What are 655V156G2I3T OscillatorsOscillators are electrical circuits that produce continuous periodic waves that oscillate between two states, frequently using the output of the circuit to generate the same signal at other points in the circuit. This property makes it possible for oscillators to power electronic devices such as transistors, integrated circuits (ICs), and radio-frequency (RF) applications. The 655V156G2I3T oscillator is a small, surface-mount oscillator designed for use in different applications.ApplicationsThe 655V156G2I3T oscillator is a highly versatile device that can be used in a variety of applications. It is designed to generate high frequency signals, and is used in many applications, including radio frequency (RF) systems, data communication, high frequency analog and digital signal processing, frequency synthesizers, and microprocessor-based systems.In RF systems, the 655V156G2I3T oscillator is used to generate high frequency signals required for the transmission of data. It can be used in low noise and low power applications, or in applications requiring extremely high frequency and/or high power output. In data communication applications, the 655V156G2I3T oscillator is used to generate high frequency signals required for the transmission of data. It can be used in applications such as local area networks (LANs), wide area networks (WANs), and the Internet.In high frequency analog and digital signal processing, the 655V156G2I3T oscillator can be used to generate signals required for the processing of complex signals. It is used in applications such as digital signal processing (DSP), radio frequency interference (RFI) mitigation, digital image processing, and other signal processing tasks.In frequency synthesizers, the 655V156G2I3T oscillator is used to generate signals required for the synthesis of frequencies. It is used in applications such as frequency hopping systems, wideband communications, and digital communication systems.In microprocessor-based systems, the 655V156G2I3T oscillator is used to generate signals required for the execution of instructions from a microprocessor. It is used in embedded systems, controllers, and digital signal processors.Working Principle The working principle of the 655V156G2I3T oscillator is based on the oscillatory behavior of an electronic circuit. It consists of an active element such as a transistor or an operational amplifier (op-amp), a resistor, and a capacitor. The active element is used to supply an alternating current to the resistor and the capacitor, which act as dampers. The dampers convert the alternating current into an oscillatory waveform, which is then amplified by the active element and sent out as an output.ConclusionThe 655V156G2I3T oscillator is a highly versatile device that can be used in a variety of applications. It is designed to generate high frequency signals, and is used in many applications, including radio frequency (RF) systems, data communication, high frequency analog and digital signal processing, frequency synthesizers, and microprocessor-based systems. Its working principle is based on the oscillatory behavior of an electronic circuit, and it consists of an active element, a resistor, and a capacitor.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description