656C10003C2T

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

An oscillator is an electronic circuit, which generates a repetitive waveform such as a sine wave or square wave. This can then be used for a variety of purposes, such as providing a time base for digital logic, or driving an analog circuit such as an amplifier. The 656C10003C2T is one such oscillator developed by Texas Instruments, and in this article we will discuss its application field and working principle.

656C10003C2T Application Field

The 656C10003C2T oscillator is used extensively in the consumer electronics industry for applications ranging from embedded systems to routers, modems and even satellite dishes. The oscillator can even be used for high-speed switching applications, as the low jitter and wide frequency range makes it well-suited for this function. Another key application field for the 656C10003C2T is in automotive electronics, where its superior operating temperature range (-40C to +125C) makes it ideal for use in harsh environments.

656C10003C2T Working Principle

The 656C10003C2T oscillator works by converting an incoming AC current signal into a DC current signal. This is done by means of a transformer and a rectifier circuit. The transformer takes the AC current and converts it into two signals -- one at a frequency slightly higher than the input frequency, and one at a frequency slightly lower. This signal is then fed into a rectifier circuit, which takes the two signals and combines them to form the DC signal. This DC signal is then used to power the oscillator.

The oscillator itself is made up of three components -- an oscillator stage, a phase-locked loop and a voltage-controlled oscillator. The oscillator stage is responsible for generating the sinusoidal waveform which is then fed into the phase-locked loop. The phase-locked loop acts like a clock, locking the oscillator to an input signal and ensuring that it stays in sync. Finally, the voltage-controlled oscillator section is used to control the frequency of the output signal, allowing it to be adjusted as needed.

Conclusion

The 656C10003C2T oscillator from Texas Instruments is a powerful tool for use in many different applications. Its high operating temperature range and range of frequency outputs makes it well suited for both consumer and automotive use. With its transformer, rectifier and oscillator components, it is able to produce a steady DC signal which can then be used to drive other circuits.

The specific data is subject to PDF, and the above content is for reference