671643-2

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Crimpers, Applicators, Presses

The 671643-2 is an applicator designed for semi-automated production in industrial environments. It’s designed to work with precision metal crimp contacts that are found in a variety of applications, including vehicle wiring harnesses, airframe wiring, and mil-spec wiring assemblies.

The primary purpose of the 671643-2 is to process crimp contacts through its semi-automated operation. This is accomplished via a series of steps that are programmed into the system. The specific number of components and the steps that must be completed to successfully produce the metal crimp contacts will vary depending on the application.

The first step in the process is to load the crimp contact into a guide tube that is sized and shaped for the specific application. When loaded, the guide tube is then inserted into the kit frame and loaded onto the crimping vise. The crimp vise clamps down on the crimp contact and holds it in place as a crimp tool moves the contact into the position.

Once in the correct position, a force is then applied to the contact to form the correct metal wall thickness. This force is provided by a gas cylinder or a servo motor that is controlled by the processor. Depending on the application, this force may be used for either a single crimp, or a multi-contact application.

Once the force has been applied, the crimp tool then advances to the next station. At this stage, the contacts are checked for any defects by using an inline quality control system. If the contact is found to be defective, it is automatically removed and a new contact is inserted into the guide tube.

Once all of the contacts have been checked and passed inspection, the processor then controls the crimp tool so that it moves the contacts into the determined position. At this point the system will apply a final force to the contacts to complete the crimp and ensure that the walls meet the desired thickness.

When the process is complete, the system moves the completed crimps to the next station which may be a robot arm for assembly or another automatic process.

The 671643-2 is specifically designed for reliable high-speed operation. It can process up to 300 crimps per minute while maintaining accuracy and repeatability over long production runs. The system is also equipped with a built-in monitoring system that can detect any abnormality that may occur during the process.

The 671643-2 is a reliable and cost effective solution for high precision crimping applications. It can be used for a variety of crimping applications including airframe wiring, signal and power connector manufacturing, and other high thin-wall precision crimping requirements.

The specific data is subject to PDF, and the above content is for reference