Allicdata Part #: | GH7880-ND |
Manufacturer Part#: |
67C18-8-M-P |
Price: | $ 61.26 |
Product Category: | Sensors, Transducers |
Manufacturer: | Grayhill Inc. |
Short Description: | SWITCH JOYSTICK FINGERTIP KNOB, |
More Detail: | N/A |
DataSheet: | 67C18-8-M-P Datasheet/PDF |
Quantity: | 10 |
1 +: | $ 55.69200 |
10 +: | $ 52.41600 |
25 +: | $ 50.77800 |
50 +: | $ 47.50200 |
100 +: | $ 44.88120 |
Series: | 67C |
Part Status: | Active |
Encoder Type: | Optical |
Output Type: | -- |
Pulses per Revolution: | 20 |
Voltage - Supply: | 5V |
Actuator Type: | 1/4" Dia Flatted End |
Detent: | Yes |
Built in Switch: | No |
Mounting Type: | Panel, PCB Through Hole |
Orientation: | Vertical |
Termination Style: | PC Pin |
Rotational Life (Cycles Min): | 1M |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
An encoder is a type of electrical device that converts a set of digital or analog signals from a physical interface into a distinct code. This code is often referred to as a signal “word” or data word. Encoders are commonly used in industrial applications to control a variety of machinery, such as steam turbines, robots, and other automated equipment. Encoders are also routinely used in vehicles, aircraft, and other transportation systems.
One of the most commonly used encoder for industrial applications is the model 67C18-8-M-P. This type of encoder is an incremental device, meaning that it is designed to produce a specific output that is incremented when the shaft is turned. In other words, the encoder will register a change in output for every incremental rotation of the shaft-the more it is turned, the more its output will change.
The 67C18-8-M-P encoder consists of two sections-a sensor and a logic section. The sensor portion contains two rings of infrared sensors that detect the incremental displacement of a rotating shaft. As the shaft turns, the sensors measure the incremental displacement and sends a signal to the logic circuitry. This signal is then sent to its output, which can be used to control the machine it is attached to.
The 67C18-8-M-P encoder is capable of performing several operations including two-speed operations, programmable counter operations, and quadrature outputs. The encoder can also be used for position and speed control, as well as for sensing the direction of motion. The encoder is also able to generate a signal that is proportional to the angular displacement of the encoder shaft. This type of encoder can handle a wide range of input frequencies and is designed to withstand harsh conditions, making it ideal for industrial applications.
The 67C18-8-M-P encoder is also one of the most cost-effective encoders available. Its relatively low cost and high accuracy makes it an ideal solution for industrial applications such as robotic automation, machine tools, and manufacturing processes. Additionally, its flexibility makes it suitable for a wide variety of applications, from high-precision sensing to high-speed motion control.
Encoders are an essential component in any industrial application. The 67C18-8-M-P encoder is a cost-effective and reliable solution for industrial applications, making it an ideal choice for engineers and technicians. Its wide range of capabilities and dependable performance make it an essential tool for ensuring accurate and reliable operation of the machinery it is attached to.
The specific data is subject to PDF, and the above content is for reference
Part Number | Manufacturer | Price | Quantity | Description |
---|
E5908-67C152-L | Pulse Electr... | 0.0 $ | 1000 | CONN MOD JACK R/A 8P8C SH... |
67C18-8-M-P | Grayhill Inc... | 61.26 $ | 10 | SWITCH JOYSTICK FINGERTIP... |
67C18-8-M-040C | Grayhill Inc... | 61.26 $ | 10 | PROPORTIONAL JOYSTICK WIT... |
OPTICAL ENCODER
ENCODER HT 3CH 512CPR 11MM
ENCODER DGTL 2CH150LPI BENT LD
ENCODER KIT 3CH INCREMENT 400CPR
ENCODER MECH 15-PULSE 30-DETENT
ENCODER ROTARY 1000PPR 9V