6FC

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Much like most tools and products, 6FC fuses have multiple applications and perform different functions depending on the current conditions. They are used to protect electric motors, circuit breakers and other electrical systems from damage and can be used in varying voltages. 6FC fuses are designed to quickly trip when the current exceeded their ratings, thus limiting the supply of current passing through them and protecting the other components.

The 6FC typically has a maximum voltage rating of 600 volts direct current, and up to 80 amperes of sustained current. When protecting a wide variety of electrical systems from damage due to excessive current, this type of fuse is often the go-to solution. Not only do they provide an effective solution, they are also relatively inexpensive compared to other options.

The working principle of 6FC fuses is fairly simple. When the current is too high, the fuse element melts in order to prevent further current from flowing through the circuit. This is known as the melting action of the fuse, and is the basis for the entire operation of the fuse. As soon as the element melts, the fuse trips, which causes an interruption in the flow of current through the circuit.

In most cases, the 6FC fuse element is composed of a wire, either made of copper or some other conductive material. This wire is securely held in place within the fuse body, with the current passing through it and completing the circuit. The actual melting action of the wire is achieved by the sudden build-up of heat due to the increase in current. This causes the wire to become resistance to the current, which generates more heat and eventually melts the element, which then breaks the circuit.

When the fuse is protecting an electric motor, it is typically mounted in series with the motor so that the motor can be protected. The series mounting allows any high loads of current such as a motor overload or short circuit to be diverted past the motor and into the fuse element. As the current increases, the fuse element heats up and eventually melts, breaking the circuit.

The 6FC fuse is also used in many circuit breakers. This type of fuse is typically mounted in parallel with the circuit breaker in order to provide protection against short circuits. If a short circuit occurs, the current will pass into the fused element and the melting action will occur, tripping the circuit breaker and preventing any further damage.

In short, 6FC fuses are a reliable and economical protection for electrical circuits and systems. They provide a quick-acting protective mechanism and allow for the safe operation of electrical systems. By using this type of fuse, electrical systems can be protected from damage due to overcurrents and faults in the equipment.

The specific data is subject to PDF, and the above content is for reference