6N137-060E

Data Rate:	10MBd
Supplier Device Package:	8-DIP
Package / Case:	8-DIP (0.300", 7.62mm)
Mounting Type:	Through Hole
Operating Temperature:	-40°C ~ 85°C
Voltage - Supply:	4.5 V ~ 5.5 V
Current - DC Forward (If) (Max):	20mA
Voltage - Forward (Vf) (Typ):	1.5V
Rise / Fall Time (Typ):	24ns, 10ns
Propagation Delay tpLH / tpHL (Max):	75ns, 75ns
Series:	--
Current - Output / Channel:	50mA
Output Type:	Open Collector, Schottky Clamped
Input Type:	DC
Common Mode Transient Immunity (Min):	1kV/µs
Voltage - Isolation:	3750Vrms
Inputs - Side 1/Side 2:	1/0
Number of Channels:	1
Part Status:	Active
Packaging:	Tube

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Introduction

Optoisolators, or optocouplers, are devices used to electrically isolate two separate circuits. These devices use light to bridge the gap between circuits to prevent electrical noise from being transmitted. The 6N137-060E, manufactured by Vishay, is a popular optoisolator used in numerous commercial and industrial applications due to its reliable operation and impressive specifications. This type of optoisolator is classified as a logic output device; specifically, it is a part of the 6N17x family of optocouplers.

Features

The 6N137-060E optocoupler utilizes an LED as its light source and an integrated photodiode detector to transfer electrical signals between two circuits. This device is an ideal choice for logic output applications due to its 1 MBd transfer rate and typical propagation delay of 0.8µs (as measured under a temperature of 25ºC). The low propagation delay and high output current of 25mA make this device capable of handling the most demanding signals.In terms of physical features, the 6N137-060E has an 8-pin DIP dual in-line package, with the center 4 pins used for power and the outer 4 pins used for logic output. This package requires an operating voltage of both 5V and 3.3V to work correctly. The device has a wide operating temperature range of -55 to 125ºC and a wide common mode range of -5 to 36V, allowing it to work in a variety of extreme conditions.

Applications

The 6N137-060E optocoupler has numerous uses within electronic systems. The device can be used as a logic output isolator in motor drives and programmable logic controllers (PLCs). Additionally, the high speed and current capacity of the optocoupler allow it to be used in applications that require switching between multiple signal conditions, such as in light intensity meters, audio amplifiers, and power supplies.

Working Principle

The working principle of the 6N137-060E is fairly simple. The device contains both an LED and a photo-detector, which are linked by an optical path which runs through the center of the device\'s package. When the LED is energized, it emits light. This light is then received by the photo-detector, which converts the light energy to an electrical signal, and the optocoupler acts as a bridge between the two circuits.The 6N137-060E is an AC input optocoupler, meaning that it can be used to transmit an AC signal from one circuit to another. When AC power is applied to the LED, it will cause the photo-detector to put out a corresponding AC output signal. This makes the 6N137-060E ideal for use in many AC-based applications.

Conclusion

The 6N137-060E is a useful and versatile optocoupler, capable of reliably isolating two circuits. With its impressive operating parameters and wide temperature and common-mode ranges, the 6N137-060E can be used in a variety of applications to provide reliable and efficient electrical isolation. Its AC input capabilities make it an ideal choice for AC-based applications, such as motor drives, PLCs, and light intensity meters.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description