6N137-X007T

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Optoisolators – Logic Output

The 6N137-X007T is a type of optoisolator, used for electrical separation between two systems. It is a logic output optoisolator, where the output state indicates which one of two logic levels was applied to the input. The 6N137-X007T is an optocoupler with a GaAs infrared LED combined with a phototransistor output.

The optoisolator or optical coupler works by using light to bridge the two systems. The light generated from the LED is detected by the photodetector, which sets the output. Electrically speaking, the two systems are completely separated from each other, with no galvanic connection between them. The optoisolator prevents high voltages/currents from entering the system, when the output is connected to a lower voltage/current system.

The 6N137-X007T is designed with a phototransistor output that can only handle up to 10V and very small current. It is often used in static on/off control, as well as very low power switching applications. The optocoupler can be used for interfacing between AC and DC circuits, such as for AC to DC power supplies. It is also used as protection devices against lightning or power surge, since the optocoupler is insulated from the protected system.Due to the use of an infrared LED, the 6N137-X007T optocoupler works even when mounted with other components at less than 2.5mm spacing. The optoisolator has a 1kV/us isolation speed, ensuring fast response from the input to the output. The minimum rise/fall time is typically 10/5ns.

The response time is also important when selecting the 6N137-X007T. A slower response time of the optoisolator will cause slower reaction in the system. The 6N137-X007T has a turn-on time of 1us and a turn-off time of 0.5us, enabling fast switching even in low frequency applications. The 6N137-X007T has an LED-to-output delay of only 6 ns, making it ideal for high frequency applications such as in high speed logic systems.

The 6N137-X007T can also be used with inputs that have low current requirements and is capable of driving various logic levels. It is available in 4-Pin DIP or 5-Pin DIP packages for easy installation. The packaging also includes photocoupler isolation, for safety and performance.

In summary, the 6N137-X007T is a type of optoisolator designed with a phototransistor output for applications requiring electrical isolation and logic output. It provides high speed logic level switching and accurate response time for detecting signal changes. Furthermore, the 6N137-X007T is an economic and compact optoisolator, ideal for use in high speed logic systems and static on/off control.

The specific data is subject to PDF, and the above content is for reference